X-Ref Opening Routine

Discussion in 'AutoCAD' started by Tim, Jul 15, 2004.

  1. Tim

    Tim Guest

    Does anybody have a X-Ref Opening routine (that works) that will open a
    x-ref for editing by simply selecting the X-ref on screen..
    Not looking to do in-place editing.


    Thanks


    Tim W.
     
    Tim, Jul 15, 2004
    #1
  2. Tim

    jclaidler Guest

    If you have AutoCAD 2005, XOPEN will do this for you.
     
    jclaidler, Jul 15, 2004
    #2
  3. Tim

    Tim Guest

    I'm running 2002 so...

    Sorry I should have said that in the first post.

    Tim W.
     
    Tim, Jul 15, 2004
    #3
  4. Tim

    T.Willey Guest

    I don't think that should be to hard. If you are family with lisp. Select the xref, search for it's table data (tblsearch) then get the path (assoc 1.. i think). Then you can use (vla-open... to open said drawing, after you combind the path with the drawing name.

    Hope that steers you in the right direction.
    Tim
     
    T.Willey, Jul 15, 2004
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. initiating lisp routine withing a routine

  2. Need help!! Saving X-ref Paths

  3. Running a lisp routine using a lisp routine

  4. Bind a cliped x-ref?

  5. Verilog Ref Book

  6. Pointing a drawing ref'ing a part to ref an assy?

  7. Lisp routine help needed: change layer properties on opening

  8. VBA routine at dwg startup, when opening through Xref Manager

Loading...