working with viewports

Discussion in 'AutoCAD' started by Diego F. Muñoz, Jan 11, 2005.

  1. Diego F. Muñoz

    Diego F. Muñoz Guest

    Can you offer some basic instructions to help me get started or maybe a good
    reference manual that I should get that will help me work with viewports. I
    want my drawings with a title block but I use different page size.
    Do I need to create a title block for each different page size? and do I
    create it in mode space? Thank you.
     
    Diego F. Muñoz, Jan 11, 2005
    #1
  2. Diego F. Muñoz

    Geoff Olner Guest

    Diego
    If you require a different sized titleblock on different layouts then it
    will have to be separate titleblocks of different sizes to suit. Ideally
    this should be created in the layout. You may wish to consider using
    attributes for the information contained within the titleblock.

    Geoff Olner
    Architectural Images -Sheffield (UK)
     
    Geoff Olner, Jan 11, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Working with Scriptpro

  2. selecting MS viewports with Lisp

  3. Save layout with all visible objects in all viewports to new dwg

  4. Problems with "cut with surface" when working with "spilt"

  5. crash in drawing with many viewports and annotative dimensioning.

  6. plotting to dwf with irregular viewports

  7. Wipeouts with Non-Rectangular Viewports

  8. Problems with layer management in viewports

Loading...