Wire Forming Experience Needed

Discussion in 'SolidWorks' started by east.machine, Aug 26, 2006.

  1. east.machine

    east.machine Guest

    Is there someone in this group who is expert at different types of cams
    and the motions that they provide?
    We are in need of what we call a "barrel cam", which has to have an
    adjustable throw of between .1" and 2.5". The speed it must support is
    165 CPM, and it must have repeatability to .002".
    I am in hopes that I wouldn't be asking too much if someone could
    provide us with an animation of this cam and it's linkage, providing of
    course that we would not be infringing on anything proprietary.
    I know that this type of cam lends itself to wire forming equipment,
    and chain machines, and if someone could help us out on this, we would
    appreciate it.
    Ira
     
    east.machine, Aug 26, 2006
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. OpenMosix or Gridengine experience

  2. Any experience with the sp1tswitch from analogLib?

  3. PDM experience

  4. windchill experience

  5. Experience with Fishbowl Solutions linkTuner?

  6. Nvidia quadro FX 1000 or 2000 experience?

  7. Above Market, Solidworks experienced - Mechanical Engineer with experience in Electro Mechanical de

Loading...