Wildfire 3.0 Solaris 10 x86

Discussion in 'Pro/Engineer & Creo Elements/Pro' started by Chewie, Jun 13, 2006.

  1. Chewie

    Chewie Guest

    Currently running datecode F000 of Wildfire 3.0 Solaris 10 x86 on Sun
    Ultra 20s.

    This version lacks the gcode post processor and Vericut.

    Anyone know if datecode M010 contains at least the post processor.
    Vericut would be nice too, but Wildfire is pretty much a waste to our
    company without the post processor. We currently have to walk over to
    an ancient Windows machine with Wildfire 3.0 installed to run the post
    processor or use Vericut.

    Putting Windows on the Ultra 20s is not an option.
     
    Chewie, Jun 13, 2006
    #1
  2. Chewie

    Paul Gress Guest

    I have M010 installed on a W2100z. If you mean by "gcode post
    processor" is to select:

    Applications
    NC Post Processor

    Then I get some form of an error message

    "xterm: Can't execvp
    /Disk1/Binaries/Pro_Engineer/WildFire_3/sun_solaris_x64/obj/optfile"

    It appears a file "optfile" is missing.

    Paul
     
    Paul Gress, Jun 14, 2006
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Redhat9 (x86) and Cadence tools?

  2. x86-64 binaries and Intel EM64T?

  3. (x86 linux) SSE2 usage by simulation applications?

  4. CADENCE & Solaris x86

  5. Anyone running Cadence under Solaris on Sun Fire x86 Servers?

  6. x86 for Cadence... Dual-core or quad-core?

  7. Wildfire 3.0 on Solaris x86

  8. Reviewing and Correcting Boot.ini Settings on x86-based Systems

Loading...