What's the difference between thru until and to selected?

Discussion in 'Pro/Engineer & Creo Elements/Pro' started by Pablo, Jan 14, 2005.

  1. Pablo

    Pablo Guest

    Hi,

    I would like to know what is the difference between the thru until and to
    selected when creating a hole? I'm using WF V2.0, thanks for your help.

    Pablo,
     
    Pablo, Jan 14, 2005
    #1
  2. Pablo

    Pablo Guest

    Hi Ben,

    I know the description of each other I have search through the help before
    posting in this newsgroup... What I wanted to have is a example that would
    explain it more explicitely, because from the description in the help the
    two options appear to do the same thing when a surface is selected. I found
    out that with a circular section that needed to be extrude up to a surface
    that if you choose THRU UNTIL and the complete section is not crossing the
    surface, the feature does not work however if I choose TO SELECTED the
    feature worked even though the section did not completely pass trough the
    surface.... Thanks for taking the time to reply.

    Pablo,
     
    Pablo, Jan 15, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. What is the potential difference between HSPICE and Spectre ?

  2. Whats the difference in between ICFB 4.46 and 5.0.32 ??

  3. Strange! What's the difference between core utilization ratio and core row utilization ratio?

  4. what difference between couple and decouple when doing RCX ext.

  5. What is the difference between the text display vs label?

  6. what is the difference between defun and procedure?

  7. What is the difference between sketcher relation and pat relation?

  8. thru versus thru-all -the final thread?

Loading...