WAY TO PRINT NEW BOM?

Discussion in 'SolidWorks' started by Not Necessarily Me, Feb 19, 2004.

  1. Not Necessarily Me

    Not Necessarily Me Guest

    Is there a way to print the new BOM in 2004? I used to cut & paste the
    excel in work and print.
     
    Not Necessarily Me, Feb 19, 2004
    #1
  2. Not Necessarily Me

    Jess G. Frandsen Guest

    Hi Jeff

    Using our product "ToolWorks BOM Manager" you can extract SolidWorks BOM to
    Microsoft Excel or to a XML-file. The XML file supports stylesheets that
    gives you the perfect layout for printing and sharing your BOM's.

    http://www.toolworks.info

    See a sample BOM from SolidWorks in XML:
    http://www.toolworks.info/xml/MOTOR.xml

    Best regards
    Jess G. Frandsen
     
    Jess G. Frandsen, Feb 19, 2004
    #2
  3. Not Necessarily Me

    Habib Guest

    Hello towarts you Jeff -

    You are possibley try touch on bom with the mouses pointer and go to save on
    menu then go down to save as text file.

    Also too you are permit to save to a file at time of save, but only also for
    to name text file as BOM.XLS and you can to click on file and now excel
    opens up else when opening with excel, use to open with files of type .TXT.

    It works too well for me as to well. I hope I have helps you. Best of
    lucks.

    Sincerefully,

    Habib
     
    Habib, Feb 19, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Skill Q: Is there a way to get object from the print name

  2. Deleting BOM table without deleting BOM balloons

  3. BOM: margins in BOM-table (embedded)

  4. SW BOM versus Excel Based BOM

  5. Print Preview Renaming BOM Colum?

  6. SW BOM to Excel BOM

  7. BOM Experts - Possible to export SW BOM?

  8. Print Manager to batch print DWF files to windpws printer

Loading...