Visually missing Line Types in PS (v2008)

Discussion in 'AutoCAD' started by Mr. B, Oct 22, 2007.

  1. Mr. B

    Mr. B Guest

    I've upgraded to 2008 about a week ago... Full version/fresh install...

    A very strange thing occurs that I've never seen before. While working in
    Paperspace... if I have a drawing with layers having a Line Type like Hidden
    or what ever... they 'appear' to be Continuous... until I do a regen... then
    they show as they should...

    Very strange... I can't see why (cause this didn't happen in v2005, or any
    other versions previously...

    Anyone with a fix to this? A New Variable? Or what?

    Thanks

    BruceF
     
    Mr. B, Oct 22, 2007
    #1
  2. Mr. B

    Coach Guest

    is your psltscale variable set to "0"?
     
    Coach, Oct 29, 2007
    #2
  3. Mr. B

    Mr. B Guest

    Yes...

    There is suppose to be a FIX to this (I think) from the AudoDesk site (AutoCAD
    Linetype_Hotfix_32bit.zip). I've yet to install this. But it looks like it
    is suppose to fix my issue (fingers crossed).

    BruceF
     
    Mr. B, Oct 29, 2007
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. draw a circle with lisp.. (visually)

  2. where to assign the line types that awd use for ocean standalone

  3. Virtuoso: missing solder...not missing

  4. Route Line (Explode lines) Missing

  5. Display messed up, but the parts right, visually impaired SW

  6. SW2008 BOM - Missing Items - missing?

  7. COMMAND LINE WINDOW MISSING

Loading...