viewport UCS rotation ish

Discussion in 'AutoCAD' started by Dancing stag, Jul 19, 2004.

  1. Dancing stag

    Dancing stag Guest

    I've recieved a drawing with a area of surveyed quay.
    In model space it's located to real world cordinates, Ordnance grid and datum.
    In model space it's apparent orientation is rotated by about 80 degrees.
    I do not know how this was done or how to mimic it in 2002 LT

    Can anyone tell me how this was done?
     
    Dancing stag, Jul 19, 2004
    #1
  2. Dancing stag

    Michael Bulatovich Guest

    With TILEMODE set to 1, "enter" model space in the port.
    Set the ucs to whatever you want, then issue the PLAN command.
    Zoom to the desired scale.
     
    Michael Bulatovich, Jul 19, 2004
    #2
  3. Dancing stag

    Paul Turvill Guest

    DVIEW / TWist.
    ___
     
    Paul Turvill, Jul 19, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. UCS - viewport problem?

  2. UCS rotation problem

  3. Paperspace viewport UCS's

  4. UCS ROTATION

  5. viewport on top of another viewport in paper space

  6. UCS rotation problem

  7. viewport UCS ish

  8. ACad LT2005 - non rectangular ViewPort Question + UCS question

Loading...