Viewport problems with X-Ref

Discussion in 'AutoCAD' started by DJC, Nov 1, 2004.

  1. DJC

    DJC Guest

    I have a drawing with an x-reference attached to it. My drawing has 30+ layouts and when I am in a layout I switch into model space and freeze and thaw the layers (layers are from the x-ref'd file) with the current viewport toggle. All seems good. However, when I exit the drawing and get back in later, all the layers that I froze in the viewports are back on.
    Is there a setting for x-ref's that controls this?
     
    DJC, Nov 1, 2004
    #1
  2. DJC

    Larry Rickel Guest

    Options - Open and Save - Retain changes to xref layers. This variable is
    saved with the drawing.

    layouts and when I am in a layout I switch into model space and freeze and
    thaw the layers (layers are from the x-ref'd file) with the current viewport
    toggle. All seems good. However, when I exit the drawing and get back in
    later, all the layers that I froze in the viewports are back on.
     
    Larry Rickel, Nov 1, 2004
    #2
  3. DJC

    teiarch Guest

    Same thing from the command line: VISRETAIN=1
     
    teiarch, Nov 2, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Need help!! Saving X-ref Paths

  2. X-Ref Opening Routine

  3. Bind a cliped x-ref?

  4. Verilog Ref Book

  5. Pointing a drawing ref'ing a part to ref an assy?

  6. Problems with "cut with surface" when working with "spilt"

  7. viewport on top of another viewport in paper space

  8. viewport within viewport

Loading...