Video card - GeForce 8800GTX 768MB

Discussion in 'SolidWorks' started by mtripoli, Jul 24, 2007.

  1. mtripoli

    mtripoli Guest

    Anyone using this card or similar with SW 2007?
     
    mtripoli, Jul 24, 2007
    #1
  2. mtripoli

    neilscad Guest

    as a rule gaming cards dont cut it for SW - no realview , lesser
    performance, no drag through section view, perhaps not as good driver
    optimisation/certification...
    look here http://www.xbitlabs.com/articles/video/display/radeon-hd-2900-games_19.html
    an ATI X1950xt is better according to this test at least in straight
    comparison as a game card..
    also I tell you quietly that a X1950 can be softmodded to a
    FireGL...but be sure to research it thoroughly first
     
    neilscad, Jul 25, 2007
    #2
  3. mtripoli

    neilscad Guest

    actually I better say that people havent been happy with ATI for SW in
    the past, and also if you want the least hassle you might be better
    off buying a low end Quadro instead like a 560 if you are minding your
    $$
    HTH
     
    neilscad, Jul 25, 2007
    #3
  4. mtripoli

    mtripoli Guest

    I originally thought that after all these years (hardware years) that
    the Quadro FX 1100 that I had must be getting "old". As it turns out,
    this is still a good card. So, no gaming cards...

    Thanks all...

    MT
     
    mtripoli, Jul 25, 2007
    #4
  5. mtripoli

    neilscad Guest

    here is another performance comparison but for quadros
    http://features.cgsociety.org/story_custom.php?story_id=3994&page=3"

    IMHO the top end cards although nice to have are just too expensive to
    bother with.
    hopefully the next generation based on 9800 series will include some
    decent performing low-mid range cards to keep everyone happy and run
    realview enhancements well.
     
    neilscad, Jul 28, 2007
    #5
  6. mtripoli

    neilscad Guest

    Drag through section works just fine with a game card.

    really? it hasnt worked for me on any of the cards I used as a
    temporary measure...it will make the section but it wasnt z buffered
    so is was very jerky/slow..maybe the method was changed after SW05.

    well perhaps more correctly if Nvidia allowed it...they want to sell
    their cards and at a premium.
    the cards are basically the same just knobbled internally to be more
    suited to games or CAD.
    allowing Realview in itself isnt going to help with the cut in
    performance...
    still for some folks the performance might be adequate esp in
    comparison to the $ saved
     
    neilscad, Jul 29, 2007
    #6
  7. mtripoli

    mtripoli Guest

    Well, I said the hell with it and bought the nVidia Quadro FX4500 on
    eBay for $700... THe FX110 has been great for years; I expect tot get
    the same from this..
     
    mtripoli, Jul 30, 2007
    #7
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.