Vias not extracting

Discussion in 'Cadence' started by Spaceghost, Aug 21, 2004.

  1. Spaceghost

    Spaceghost Guest

    Hi, I'm doing LVS and when I extract my layout, the vias are not in the
    extracted view. Actually, vias which I draw by hand have disappeared, but
    via instances, such as the vias you get when creating a path and switching
    metal layers, do make it to the extracted view.

    Is there any obvious reason this could be happening, or is it likely the
    extraction rules are somehow screwed up?

    Thanks,

    Marc
     
    Spaceghost, Aug 21, 2004
    #1
  2. Which tool are you using? It sounds like Assura since you talk about LVS
    as including extraction, which in Diva is a separate process. More basic
    information in your question would help provide a meaningful response:
    tool, modes, options.....

    In Diva, the extracted view would have only the recognized devices from
    the extractDevice rules, unless your rule deck has saveInterconnect,
    saveDerived, or copyGraphics rules. What you describe, the via cells
    being in the extracted view, sounds like you might be doing a macrocell
    extraction and the vias are marked as "macro". Drawn vias would
    disappear unless the rules tell Diva to save them.
     
    Diva Physical Verification, Aug 21, 2004
    #2
  3. Spaceghost

    Spaceghost Guest

    I accidentally used the 'by' layer instead of the 'dg'. Case closed!
     
    Spaceghost, Aug 23, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.