Vector conversion

Discussion in 'SolidWorks' started by ksudavid, May 8, 2006.

  1. ksudavid

    ksudavid Guest

    I have a couple of DXF files exported from Correll Draw and all the gemoetry
    is complex curves. Anyone have software (like Arbor Image) that would
    convert the geometry to lines/arcs and be willing to convert them for me.
    This is a one time issue that I've never dealt with before and hopefully
    never will again.

    David
     
    ksudavid, May 8, 2006
    #1
  2. ksudavid

    Lee Bazalgette - factorydesign Guest

    If you can get them as PDF from Corel Draw you (or I ) could use Ghost View
    to convert to DXF - tends to work pretty well I've found. Alternatively from
    PDF to illustrator is pretty easy, and then into Solidworks should be ok....
     
    Lee Bazalgette - factorydesign, May 8, 2006
    #2
  3. ksudavid

    info Guest

    David,
    If you will go to the Arbor Image site, you will find a free working
    demo for you to download. For a one time thing such as you describe,
    this should render you Golden.

    http://www.arborimage.com/cutgshop.htm (link)

    Good luck,
    G. De Angelis
     
    info, May 8, 2006
    #3
  4. ksudavid

    ksudavid Guest

    The free demo only works with files they provide in their proprietary .ABI
    format.

    David
     
    ksudavid, May 8, 2006
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Sorting Rectangle Vector List

  2. Raster to Vector (Text identification)

  3. Verilog-A vector syntax

  4. mapping vector names to flat netlist nodes

  5. Estimating power consumed by a SRAM for each input vector.

  6. Vector file question

  7. scanned image - vector?

  8. Raster / Vector conversions

Loading...