Using reactor to insert block with DesignCenter

Discussion in 'AutoCAD' started by Marie Desaulniers, Jul 6, 2004.

  1. Marie Desaulniers

    Marie Desaulniers Guest

    What is the better way to control the scale and the layer when inserting a block with the DesignCenter ? Using reactors ?

    Thanks for your help
     
    Marie Desaulniers, Jul 6, 2004
    #1
  2. Marie Desaulniers

    Tony Tanzillo Guest

    There is no simple way to tell if a block is being inserted from
    Design Center. Some have mistakenly assumed that the
    undocumented "DROPGEOM" command tells you that, but
    that is not the case, because that command runs when you
    use any kind of OLE based Drag and Drop. Don't rely on it
    to detect insertion from Design Center.



    AutoCAD based Security Planning Solutions:
    http://www.caddzone.com/securityplanning


    block with the DesignCenter ? Using reactors ?
     
    Tony Tanzillo, Jul 7, 2004
    #2
  3. Marie Desaulniers

    Marie Desaulniers Guest

    Is there a method to control the layer and the scale when inserting a block from the DesignCenter ?
     
    Marie Desaulniers, Jul 7, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. DesignCenter Control

  2. Insert a round block using any quandrant

  3. AutoDesk: Thanks for dbl-click reactor. Now we need long-press reactor.

  4. Reactor vs non reactor

  5. redefining a block from designcenter in autocad 2000

  6. Activate DesignCenter with a block / Block Library.

  7. insert block (inserting specific block from dwg file

  8. insert block vs. copy block

Loading...