Unexpected Null Pointer

Discussion in 'AutoCAD' started by Jeff Curtis, Sep 14, 2004.

  1. Jeff Curtis

    Jeff Curtis Guest

    We seem to have one of the most annoying problems w/ our plotting to our
    1050C. Half of our computers in our office have WinXP, the other half
    Win2000. Whenever someone in the office w/ WinXP tries to plot a drawing
    using a page setup created by someone w/ Win2000 we get an error dialog
    "Unexpected Null Pointer", and the pc3 file for XP disappears. This happens
    in the reverse too, and also creates problems w/ batch plotting, etc etc. I
    think this is a driver problem, but any suggestions of how to get all to be
    able to share page setups and pc3 files throughout the network w/ these two
    operating systems in place?

    Thanks.

    Jeff Curtis
     
    Jeff Curtis, Sep 14, 2004
    #1
  2. Jeff Curtis

    Jeff Curtis Guest

    Thanks. I'll do some further searching through previous threads. Hopefully
    that will take care of the problem.

    Jeff
     
    Jeff Curtis, Sep 15, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Rename Style with null name

  2. Null pointer / PC3s

  3. FIX FOUND for "Unexpected Null Pointer"

  4. Null Pointer Error

  5. sheet sizes-pc3-null pointer

  6. null pointer error

  7. PC3 "unexpected null pointer"

  8. Null Pointer Problem

Loading...