Unable to Activate Part Configuration in Assembly

Discussion in 'SolidWorks' started by edge, Jun 5, 2008.

  1. edge

    edge Guest

    I have a part with two configurations that I cannot get to activate in
    the assembly. Both the default and the new configurations show in
    part mode, but only the default part configuration shows in the
    assembly tree. If I right click in the feature tree on the part to
    access the properties only the default configuration shows in the
    Reference Configuration dialog box. I also tried bring up the part
    first and changing to the new config and then bringing up assembly to
    load the part. What else do I need to do?
     
    edge, Jun 5, 2008
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Assembly part number vs. Detail part number

  2. Configuration used when opening a file from an assembly

  3. What tecknics will you use to model this type of assembly configuration?

  4. macro for recursive creation of assembly configuration ?

  5. Using a dimension of a part to pull a part into an assembly

  6. Unable to flatten bends in sheet metal part

  7. Unable to open default configuration

Loading...