Un-wrap part feature in a drawing

Discussion in 'SolidWorks' started by samurai, Mar 17, 2008.

  1. samurai

    samurai Guest

    I've created a part with a circular pattern on my part.
    The part is about 3.0" OD, with a cut-extrude feature that has been
    patterened around the OD.

    Now, in a drawing, I need to unwrap the above feature(s)/circ. pattern
    to indicate degree, position, dimensions, and etc.

    Anyway to do this?

    SW2008

    samurai.
     
    samurai, Mar 17, 2008
    #1
  2. samurai

    That70sTick Guest

    If the part is constant-thickness material, you could make it into a
    sheet-metal part and show flat pattern.
     
    That70sTick, Mar 17, 2008
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Wrap text in parameter driven title block

  2. Can Feature Names be linked to a Dim Value in that feature?

  3. Feature index in SW Feature tree ?

  4. Printing a window (i.e. a part of a drawing or part)

  5. SW2008 - Feature or No Feature

  6. Having part "wrap" to surface automatically

  7. Wrap feature

Loading...