ugh... plotter problems

Discussion in 'AutoCAD' started by robert, Apr 5, 2004.

  1. robert

    robert Guest

    Using a Design Jet 2800cp
    windows nt
    autocad 2004

    I would expect to see plotted what I see in my full preview window.
    This is not the case. It keeps truncating a portion of the drawing.

    I'm printing a 40 x 30 making sure short side first is selected.

    any ideas
    robert
     
    robert, Apr 5, 2004
    #1
  2. robert

    patrick_aps Guest

    Have you checked printer properties and document defaults of the NT4 printer ? Perhaps they don't allow you to print on such a large NT form.
    Are you using a recent HDI driver or not ? If not try the HDI driver.
     
    patrick_aps, Apr 6, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Plotter Configuration Names

  2. te koop oce scanner, oce plotter en een HP kleuren plotter

  3. HP PLOTTER 750C Plotter "Out of Memory Data Lost" Message

  4. HP 350c plotter problems

  5. Mutoh plotter - need source for plotter pens

  6. Mutoh plotter - need source for plotter pens

  7. Plotter Problems

Loading...