UCS Question

Discussion in 'AutoCAD' started by Kirk Bennett, Jan 12, 2005.

  1. Kirk Bennett

    Kirk Bennett Guest

    OK, I have a 3d steel plate drafted in AutoCAD 2005. I use the 3 point UCS
    icon to move my UCS to the position where I can draw in the same plane as
    the plate but I cant remember how to get AutoCAD (or if it can) save a view
    of this location and show it to me so that I am looking directly
    perpendicular to the plate. The problem is that it is at an angle to the x,y
    and z plane so it completely skewed in all planes so I want to be able to
    look directly at it regardless of which way is up or down...I use my 3d
    orbit but it is hard to tell if I am looking perpendicular to it..

    Any help would be greatly appreciated.

    Thanks

    Kirk
     
    Kirk Bennett, Jan 12, 2005
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Handling UCS and WCS

  2. UCS Direction problem.

  3. Setting the ucs current...

  4. Extrusion direction relative to UCS:

  5. Guru question: in LISP, can you save a VIEW, with the UCS, but...

  6. ACad LT2005 - non rectangular ViewPort Question + UCS question

Loading...