UCS/Extruding

Hi All,
I have a chute i am trying to draw, it moves in many directions so rather
than trying to draw it 'on the flat' what i have done is measured it in
'rise over distance' ie. if it is at an angle, what i do is measuer how far
it drops, then how much it moves across, then draw it by entering WCS
coordinates.

All good so far and i am left with a nice wireframe which is good and
accurate... but i cant extrude! My general method of extroding is; PE,
Multiple, select all lines, join. Then extrude to required depth. I cant
seem to do it because i cant line the UCS up with the object. Since it
moves in so many directions and has no true 'squares' I cant find anything
to lign up with.

Any suggestions on how i can either; align the object to the current
UCS/align the UCS to the object so i can PE/extrude, or extrude some other
way?

Thanks!

Shaun

 

My general method of extroding is; PE,

The Polyline Edit command does not include an extrude option. To
extrude an object there has to be a face and a path. The path is
usually a polyline because it is easier to make a 3D path out of a
polyline. You are not extruding the polyline, but the 3D face. You
should open the help, the F1 key, and then search the index for
extrude. There are quite a few entries relating to the extrude command
that should explain very well how this is accomplished.

All that being said I would have created the polyline that represents
the path of the duct, then at one end line up the UCS to the angle of
the face, usually 90 degrees to the end of the polyline, then extrude
that shape along the path of the polyline.

 

Hi,
Thanks for the tip... I use PE (Pedit) because i draw with regular lines
then convert to poly. the shape is a piece of steel plate. So i draw it
with regular lines in the plane it is actually in.... many pieces of plate,
all in different planes, making up a chute. Once it is drawn and all fits
together i need to extrude the 'plates' to give them the thickness of
whatever steel they are made out of.

So i go PE, Multiple, select all the lines that represent one plate, then
choose yes when asked if i want to convert to polylines. Then I Join.
After this i can extrude. The trouble that i have is that i cant convert
the lines to polylines because they are not on any planes of the UCS, and i
cant align the UCS to the plate because it is such an odd shape... not
square in any way, and not alligned with any part of the normal UCS; it is
out of alignment on X,Y and Z. By trying to align the UCS to the object I
can usually get it flat on only one plane.

Will have a look at the extrude command again, also will try to lookup 3D
polylines, maybe there is an option there? Spent most of the afternoon
unproductively looking through the help section on the UCS, and different
ways of aligning... I did finally work out how the positive/negative #D
rotation works though which will reduce the number of times I scream in
future ;-)

Thanks!
Shaun

 

Neglected to mention the critical data!

Autocad 2002

We have one machine which had 2007 on it, but was upgraded(?) to 2008 which
i havent had a chance to get a look at yet. Budget doesnt look like it will
cover a second license either :-(

Shaun