trim/ extend

Discussion in 'AutoCAD' started by Brian S., Aug 19, 2003.

  1. Brian S.

    Brian S. Guest

    wondering if there is a method/command to pick multiple objects to
    trim/extend instead of having to select each object individually
     
    Brian S., Aug 19, 2003
    #1
  2. Brian S.

    ffejgreb Guest

    After you start the command, hit enter again. Everything in the drawing
    will be selected, however they will not highlight. I would advice using "No
    Extend" option if you do this. You could also use a "P"revious selection
    set if one was created in another command.

    Jeff
     
    ffejgreb, Aug 19, 2003
    #2
  3. Brian S.

    Jeff Guest

    what about using fence?

    When asked to select the objects to extend/trim, type: F
    then draw your fence line (pline) across the entities that you want

    HTH
     
    Jeff, Aug 19, 2003
    #3
  4. Brian S.

    Matt Vozzella Guest

    Just a note:
    We use Acad LT - sometimes when working with drawings created with
    Architectural Desktop, selecting everything may lock the drawing up. Has to
    do with the 3d & Object enablers. Something to keep an eye out for.

    Matt
     
    Matt Vozzella, Aug 19, 2003
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Dimensions, Trim and Extend issues?

  2. Xref - Using trim, extend commands.

  3. Trim & Extend

  4. AutoCAD Tip: TRIM & EXTEND Dimensions

  5. trim / extend dimension

  6. Dimensions won't trim or extend?Why?

  7. Trim & Extend

  8. extend/trim to/from

Loading...