Toolbox help needed...

Discussion in 'SolidWorks' started by Ben, May 30, 2005.

  1. Ben

    Ben Guest

    I need to put an o-ring grove in a part and have the toolbox add in
    activated (both toolbox and toolbox browser). I click on the diameter of the
    part and then hit Toolbox - Grooves.. I then get an error stating "The
    current profile (default profile) doesn't contain any standards that have
    o-ring groove types" after I hit ok the toolbox popup comes up but it blank?

    1. Tried this on another machine and it worked no problem...
    2. Checked to see in the options if there was a wrong file location mapped
    in file locations but nouthing refrencing the toolbox or o-rings in there
    3. Checked the toolbox browser configuration to see if there was any thing
    in there about o-rings..nouthing
    4. Checked in drive:\program files\soliworks\toolbox and found "grooveu.dll"
    copied from the computer that could do a o-ring but this did not work
    5. Checked in the drive:\programs files\common files\solidworks data\
    directories and found nouthing relating to o-rings...

    What is the next step to fix this?

    Ben
     
    Ben, May 30, 2005
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.