Title Block

Discussion in 'SolidWorks' started by Scott, Nov 22, 2004.

  1. Scott

    Scott Guest

    If you have any DWG files you can import those into SW ans use those.

    Regards,
    Scott
     
    Scott, Nov 22, 2004
    #1
  2. Scott

    Brugman Guest

    Hi fellow users,

    Is there a library of title blocks anywhere? The ones in SW are not
    compleet. I think it the most important feature on a design. Furtermore, i
    do have problems placing text between lines, especially horizontally because
    there apear yellow dotted lines that forces the text in a place not of my
    liking. Help would be greatly apreciated. and sorry for the bad english.
    Greetings!
     
    Brugman, Nov 22, 2004
    #2
  3. Scott

    3d Guest

    tools>options>drawings> uncheck detail item snapping when dragging corner
    and center. will allow free dragging of objects. HTH
     
    3d, Nov 22, 2004
    #3
  4. Scott

    CS Guest

    You can do it with that on all you have to do is hold Alt down while
    dragging.

    Also once you have one in a row in a good place select each item in the row
    and RMB in the menu you will see align you can align all the text for a
    clean look.

    Regards,
    Corey
     
    CS, Nov 22, 2004
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Creating title block layouts from database

  2. Multiple Identical Attributes in Title Block - too much typing!

  3. title block automation

  4. 4 Questions for using RTEXT application in title block

  5. title block trouble

  6. title block in wildfire

  7. Automatic Rev Block, can you link the latest REV # to the title block?

  8. How do I create a solidworks title block from a cad title block

Loading...