The hole drawin in model space

Discussion in 'AutoCAD' started by Martin Sill, Aug 27, 2004.

  1. Martin Sill

    Martin Sill Guest

    Hello all,

    I have to do some drawings for BMW. They need the drawings in dgn
    format. I only have the AutoCAD LT 2005. With that program I've drawn
    everything in Paper and Modelspace. The translation-program I've found
    to translate from DWG in DGN only uses the model space of the drawing.
    How can I get everything in the model space?

    Yours sincerly

    Martin Sill
     
    Martin Sill, Aug 27, 2004
    #1
  2. Martin Sill

    Phil Chouinard [Bentley] Guest

    Pardon the plug, but you might want to consider something like Bentley PowerDraft 2004 Edition, which works on DWG files natively.
    If you would like more information on this, let me know offline...

    Phil Chouinard [www.Bentley.com]
     
    Phil Chouinard [Bentley], Aug 27, 2004
    #2
  3. Martin Sill

    Michael Bulatovich Guest

    Pardon the help, but make a block out of the paperspace stuff, go to
    modelspace and insert it with an appropriate scale factor, UCS and insertion
    point. This assumes you haven't clipped the MS stuff with a port, or have
    more than one port.
     
    Michael Bulatovich, Aug 27, 2004
    #3
  4. Martin Sill

    Tim Guest

    Could well be wrong here - no time to check - but I thought
    Microstation could open dwg files. If they only open the Modelspace
    component then you will have to follow the advice of MichaelB

    HTH

    Tim
     
    Tim, Sep 6, 2004
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Modify block in paper space will in model space

  2. Dimension in Paper Space with Points from Model Space

  3. Get a Point of a Model Space Object from Paper space

  4. paper space to model space question

  5. How do you scale dashed lines in model space to show up in paper space?

  6. Plotting Paper space as solid and Model Space grayed out

Loading...