the best mouse

Discussion in 'AutoCAD' started by Michael Schirmer, Dec 10, 2004.

  1. Does anyone have any recommendations for a mouse? Which give you the most
    bang for the buck?
     
    Michael Schirmer, Dec 10, 2004
    #1
  2. Michael Schirmer

    Anne Brown Guest

    Michael -

    You might want to take a look in the Hardware and the Digitizer
    sections:

    The Hardware discussion group can be accessed in either of the
    following
    ways:
    By NNTP discussion group reader at
    news://discussion.autodesk.com/pn.hardware
    By HTTP (web-based) interface at
    http://discussion.autodesk.com/forum.jspa?forumID=116

    The Pointing-Devices and Displays discussion group can be
    accessed in either of the following ways:
    By NNTP discussion group reader at
    news://discussion.autodesk.com/autodesk.autocad.digitize-display
    By HTTP (web-based) interface at
    http://discussion.autodesk.com/forum.jspa?forumID=17
     
    Anne Brown, Dec 10, 2004
    #2
  3. Michael Schirmer

    RickW Guest

    I've been using a Micorsoft Intellimouse "Explorer" optical (PS-2 or USB) mouse for a l-o-n-g time and never had an ounce of trouble with it.

    Recently tried a Logitech on another computer and had a lot of trouble with hiccups (mouse jumping to odd places on the screen).
     
    RickW, Dec 10, 2004
    #3
  4. Michael Schirmer

    Brad Yarger Guest

    Several years ago I developed a problem with my first finger on my right
    hand. I have gone to a five button mouse where my thumb button is the
    traditional click and my ring finger is the traditional right click. The
    two traditional buttons have been reassigned to forward and back for
    Internet Explorer. When my finger problem is bad I wear a brace that
    immobilizes my finger. The cause of my finger problems, use of a
    traditional mouse for 15 years!

    I recommend an optical mouse over one with a ball that gums up and needs
    periodic cleaning for smooth operation. Given the lost productivity and the
    doctor visit for my finger by using a traditional mouse, I would not go
    cheap because it will cost more in the long run.
     
    Brad Yarger, Dec 11, 2004
    #4
  5. Michael Schirmer

    teiarch Guest

    Microsoft Optical track ball and a chair with a good arm rest.....


    Message was edited by: teiarch
     
    teiarch, Dec 13, 2004
    #5
  6. Michael Schirmer

    Allen Jessup Guest

    I like the Microsoft Trackball Explorer. But you have to like trackballs.
    The fact that it has a trackball AND a scroll wheel is very helpful. The 4
    buttons I've programmed to Left click, F8 (ortho toggle), Right click and
    Enter. Being a trackball it allows me to rest my right arm fully on table.
    This reduces the strain on the wrist and shoulder.

    If you don't like trackballs I'm afraid this won't help much.

    Allen
     
    Allen Jessup, Dec 13, 2004
    #6
  7. Michael Schirmer

    Rick Keller Guest

    Don't know what to tell you...

    Except that I use a Logitech Cordless Click Plus I like Logitech I
    personally haven't had any trouble with it.
    It eats batteries about every 2-3 weeks so I have rechargeable they work
    great.

    Like everyone says find one that fits your hand.
    Optical seem to be better than ball-type... less moving parts.

    Rick
     
    Rick Keller, Dec 14, 2004
    #7
  8. Michael Schirmer

    Leon Guest


    IMHO I would say that if your mouse requires battery changes every 2 or 3
    weeks you ARE actually having trouble with it. ;~)
     
    Leon, Dec 14, 2004
    #8
  9. Michael Schirmer

    CAD Fiend Guest

    I use the Logitech 550, which is nice because it has 5 buttons, and it is
    optical. But make sure you connect it to the PS2, not the USB port. It will
    work much smoother.

    HTH.
     
    CAD Fiend, Dec 14, 2004
    #9
  10. Michael Schirmer

    David Thomas Guest

    You might want to look at the Logitech MX1000 Laser. I have used one for a
    few months now and love the precision. It's laser not optical and the cradle
    is also the battery charger.
    David
     
    David Thomas, Dec 14, 2004
    #10
  11. Michael Schirmer

    Rick Keller Guest

    I saw that one when I bought mine but I dont like getting anything
    rechargable that I cannot replace the batteries.

    Rick
     
    Rick Keller, Dec 15, 2004
    #11
  12. Michael Schirmer

    Eli Kay Guest

    I definately agree.

    I've been using MS IntelliMouse Explorer 3.0 for a few years now. I've got
    one at work and at home. The button programming is very extensive and allows
    you to assign commands to buttons and these can be different for each
    software you have. Also, I like Microsoft's scroll wheel: it has ribbs,
    which make it easier to grab onto. I used Logitec scroll wheel mice, but
    their button is smooth rubber and my finger just slips right over it.

    I have found, that cordless mice, any brand that I tried, is a bit slow. The
    response time to a command was over a second in some cases. That's lost
    production. I highly recommend getting corded mice.

    Overall, see that your next mouse fits your palm really well.
    Another thing, make sure you have good padding under your wrist. Mouse pads,
    that include jel-filled rests, seem to do a great job at reducing strain.
     
    Eli Kay, Dec 16, 2004
    #12
  13. Michael Schirmer

    Dave Jones Guest

    just to stick up for Logitech: I've been using a corded multibutton and now
    a cordless multibutton Logitech mouse for 6 or 7 years and have never had
    any of the troubles noted above. My current MX700 has 5 buttons and a
    wheel/button that are all programmable for any available keyboard function.
    Not one lick of problems, ever.
    Dave
    DDP
     
    Dave Jones, Dec 16, 2004
    #13
  14. Michael Schirmer

    teiarch Guest

    To Allen Jessup: They'll all wish they "liked" trackballs when their wrists and elbows give out. Then it'll be too late.......

    Imagine, grownups that can't train their thumb to do anything but assist in gripping a beer!
     
    teiarch, Dec 17, 2004
    #14
  15. Michael Schirmer

    Dave Jones Guest

    wrists and elbows give out. Then it'll be too late.......
    in gripping a beer!

    I've been using a mouse since 1988...8 to 12 hours a day, usually more than
    5 days a week. Tried a trackball for a couple of months in '98. It made my
    wrist hurt so I went back to my mouse. To each their own, everyone is
    different.
    Dave
    DDP
     
    Dave Jones, Dec 17, 2004
    #15
  16. Michael Schirmer

    Allen Jessup Guest

    Too true. I went to a trackball for a bad shoulder. Too much cutting line
    and pounding stakes when I was in the field.

    I personally only like the type of trackball that is operate by rolling the
    ball with the index and middle finger. 2 buttons on either side plus a
    scroll wheel on the left operated by the thumb. I don't like the center
    balls with the buttons in front or the "thumbies".

    Have a Happy
    Allen
     
    Allen Jessup, Dec 17, 2004
    #16
  17. Michael Schirmer

    teiarch Guest

    Yup to all: To each his own.. My MS Optical track ball is relaible, fast and my thumb is trained. My forearm and wrist never move from the chair arm. Very little thumb effort required to move anywhere on screen......besides, on my littered work area there's no place to put a "mouse operating area"!

    'Later....
     
    teiarch, Dec 17, 2004
    #17
  18. Michael Schirmer

    Dave Jones Guest

    and my thumb is trained. My forearm and wrist never move from the chair
    arm. Very little thumb effort required to move anywhere on
    screen......besides, on my littered work area there's no place to put a
    "mouse operating area"!
    your office sounds like mine :) My Logitech mouse will move the cursor from
    one side to the other on my 24" Sony monitor with about 3" of sideways
    movement so I just cleared out a 4" square hole in my clutter ;)
    Dave
     
    Dave Jones, Dec 17, 2004
    #18
  19. Michael Schirmer

    JMT Guest

    I have been using a Cordless Trackman Wheel, by Logitech for several years. It eats
    one battery a month, and that is my only criticism of it, other than I have to
    operate it since it doesn't know what to do.

    It is a thumb wheel of good size, with the smooth wheel between the left and right
    buttons. It is only a two button with a wheel. That is ok since I am only capable
    of thinking fast enough to use two buttons. Any more would confuse me.

    Jack Talsky
     
    JMT, Dec 24, 2004
    #19
  20. Michael Schirmer

    lafftrax Guest

    Try here, I've been using one for a year now and no complaints
    http://www.gyration.com/default.asp
     
    lafftrax, Dec 24, 2004
    #20
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.