Thanks to Ing. Jorge Jimenez, SICAD

Discussion in 'AutoCAD' started by JLO, Feb 17, 2004.

  1. JLO

    JLO Guest

    Thanks for your help.
    I wanted to develop my application a little bit diferent, but i could not do
    it.
    I use the proccess you told me and it works fine.
    Thanks!
     
    JLO, Feb 17, 2004
    #1
  2. JLO

    Jorge Jimenez Guest

    You are very welcomed.!!

    I know what it means that "little bit different" you're talking about.
    But let me tell you, there's nothing "little" about it.
    The solution you were after requires quite a "bit" of work.
     
    Jorge Jimenez, Feb 17, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. (entmod)ing an xref path

  2. Troublesome Block Entmod(ing)

  3. Problems with nntp/http sync'ing again?

  4. LVS expert! Issue with LVS-ing Standard Cells

  5. AND'ing shapes

  6. TAB(ing) thru Smart Mates orientation

  7. Pointing a drawing ref'ing a part to ref an assy?

  8. Accont12, Jorge's Dockable Container control

Loading...