text fonts and centering questions

Discussion in 'SolidWorks' started by Philippe Guglielmetti, Oct 7, 2004.

  1. I'm designing a template for "date disks" for watches with numbers
    from 1 to 31 or "Mon" to "Sun" arranged in a circle. The texts are
    centered on sketch segments which are offset from radii so that the
    radii go through the middle of the texts.
    My first question is : how can I quickly change the font of the 31
    texts ? I could change the document's font, but it is tedious. I
    found no way to select all 31 texts on the same sketch at once. Did I
    miss something ?
    My second question is : how can I link the baseline offsets to the
    font size, so that changing the font will automatically reposition
    the texts centered on the radii ? I don't want to "dissolve" text
    because font must be changeable...
    My answers to both is "API", but I'd make sure there is no simpler
    way before coding... If there is none, I'd fill one more enhancement
    request...
    Philippe Guglielmetti - www.e-systems.ch
     
    Philippe Guglielmetti, Oct 7, 2004
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.