SW2009 - print scale 100% from part/assy : GONE!

Discussion in 'SolidWorks' started by lee baz, Apr 8, 2009.

  1. lee baz

    lee baz Guest

    Hi,

    For some reason in SW2009 the option to print 100% from a part or
    assembly has gone. Is this an 'improvement' or is it something with my
    settings?

    You have been able to do this for YEARS, so why has it stopped now?

    Cheers,
    Lee
     
    lee baz, Apr 8, 2009
    #1
  2. lee baz

    Guest Guest

    You have to set that in page setup. then you have to go to print preview to
    see what you have. you need to go to print to setup your printer.

    First set up the printer.
    Close without printing.
    Set your scale in page setup.
    Check your results in print preview.
    Print if it is what you want.
    Close and go back to page setup if it is not.

    Bob
     
    Guest, Apr 8, 2009
    #2
  3. lee baz

    Anna Wood Guest

    Install SW2009, SP3.0 and it will be back.

    Cheers,

    Anna
     
    Anna Wood, Apr 9, 2009
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Mate References - no assy to assy

  2. Dilemma on using Assy sketch while wanting to use the parts in context in another assy.

  3. Dilemma on using assy layout sketch and wanting to use the parts in context in another assy.

  4. Print from part/asm 100% tip

  5. Print Window at 100%, not at Origin

  6. Print 100 solidworks drawings to pdf using program

  7. Balloon sub-assy based on the BOM of the parent assy?

  8. New to Inventor and want to move parts from sub-assy into top level assy and retain the constraints

Loading...