SW2007 Bill Of Material Issue

Discussion in 'SolidWorks' started by cdubea, Feb 15, 2007.

  1. cdubea

    cdubea Guest

    I'm creating some drawings of my assemblies and I'm flummoxed. The
    assemblies I'm detailing have more than one configuration and SWx
    insists on inserting the configuration name before QTY in the quantity
    column. Can this behavior be disabled? If so, how?

    Thanks a lot,
     
    cdubea, Feb 15, 2007
    #1
  2. cdubea

    Wayne Tiffany Guest

    Easy - remove the period after QTY (note lack of period).

    WT
     
    Wayne Tiffany, Feb 15, 2007
    #2
  3. cdubea

    Nev Williams Guest

    Ken,
    Using 2006 open up you r template and go to tools/options and choose the
    Document properties tab.
    To right choose 'Tables'. Bottom right you will see a few check boxes to do
    with BOMs one is "Don't copy QTY name from template".
    Does this do what you want.
     
    Nev Williams, Feb 16, 2007
    #3
  4. cdubea

    Chris Dubea Guest

    Thank you so much. How in the world did you figure this out?


    ===========================================================================
    Chris
     
    Chris Dubea, Feb 16, 2007
    #4
  5. cdubea

    Chris Dubea Guest

    I'm using 2007 so I don't think this applies. Thanks anyway.
    ===========================================================================
    Chris
     
    Chris Dubea, Feb 16, 2007
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Old Bill Krammer Groups code ceases to work?

  2. Bill Krammer code ceases to work in 2004?

  3. Advice needed regarding Bill of Materials

  4. Bill of materials showing wrong part name?

  5. Bill of Material and Family table of Assembly

  6. Item numbers don't match bill material!

  7. bill of material problem

Loading...