SW2004 weld symbol

Discussion in 'SolidWorks' started by Wayne Tiffany, Aug 14, 2003.

  1. Wayne Tiffany

    Wayne Tiffany Guest

    Somebody please check this. Set your drawing to ANSI and insert a weld
    symbol. Can you get "Stagger" to work? If so, how? If so, will it work on
    anything but fillets? (That's the way 2003 is.)

    WT
     
    Wayne Tiffany, Aug 14, 2003
    #1
  2. Wayne Tiffany

    kenneth b Guest



    It works with fillets.
     
    kenneth b, Aug 14, 2003
    #2
  3. Wayne Tiffany

    Wayne Tiffany Guest

    I just tried it again, and it worked just like 2003 - don't know what
    happened the first time.

    There are still problems with it in that you can't stagger anything but
    fillets both sides, and you also can't say which side leads.

    WT
     
    Wayne Tiffany, Aug 14, 2003
    #3
  4. Wayne Tiffany

    kenneth b Guest

    nevermind
     
    kenneth b, Aug 14, 2003
    #4
  5. Wayne Tiffany

    Wayne Tiffany Guest

    Actually specification is still there - just type into the box. However, it
    is offset a bit, thereby taking more space than it should.

    I tried the stagger again and it appears to be a case of whether the drawing
    standard was changed. If you start in ISO and change to ANSI, then the ANSI
    weld won't stagger. Also the other way around.

    WT
     
    Wayne Tiffany, Aug 14, 2003
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Pro/Weld showing weld symbols on drawing

  2. Pan error with weld symbol, etc

  3. SW2004 weld symbols

  4. Still having problems with weld symbol crashing

  5. Weld symbol error

  6. Weld symbol size...

  7. SW2006 SP3.0 PDF weld symbol

  8. Weld symbol dialog box location

Loading...