SW04 and GeForce2 GO

Discussion in 'SolidWorks' started by Markku Lehtola, Oct 31, 2003.

  1. Markku Lehtola

    Markku Lehtola Guest

    Never had any serious problems with SW03, but now it seems that something
    is different with 04, very slow with 2 windows opened. I haven't tested
    yet is it the material definations that use all the power available or
    what but something has to be done..So I played little bit with Rivatuner
    yesterday and got quite nice results...only problem is that when I tell my
    Dell 8100 that, "yes there is Quadro inside of you now", the driver gives
    me only 1280x1024 resolution instead of 1400x.. which is the best for
    8100.

    So, is there a way to have bigger resolution? I couldn't find any stuff
    with Google about this, but I remember that this has been discussed
    somewhere.

    regards
    Markku

    ps. don't tell me to buy a new laptop, my wife get's pissed of immidiately
    ;-)
     
    Markku Lehtola, Oct 31, 2003
    #1
  2. Markku Lehtola

    Sean Phillips Guest

    Sean Phillips, Oct 31, 2003
    #2
  3. Markku Lehtola

    Markku Lehtola Guest

    Thanks, there is modes.txt in drive package that says 1360x768 is
    available, Dell's resolution is 1400x1050..I'll try this driver anyway..
     
    Markku Lehtola, Oct 31, 2003
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. pros and cons of setenv and vla-put-???

  2. treedepth and treemax and ram

  3. Program activate in a drawing and execute and an other one

  4. Cell libraries and place and route

  5. schematic check and save and the time stamps

  6. CFP: DTVCS 2008 - Design, Testing and Formal Verification Techniquesfor Integrated Circuits and Syst

  7. geforce2 Ti

  8. SW04 Extruded Cut question

Loading...