SW weldment & cutlist

Discussion in 'SolidWorks' started by Wayne Tiffany, May 4, 2005.

  1. Wayne Tiffany

    Wayne Tiffany Guest

    I have an assy file that a user created by making a SW wlmt, welding on some
    other parts (as in putting them in the assy and mating them), some of them
    created in-context, and then some UHMW & bolts added for good measure. So,
    the big question is: is there some way to have all the parts show up
    individually in the SW BOM, including the 5 cutlist parts in the SW wlmt ?
    I tried different settings and didn't come up with anything. This is not
    the modeling method I would have suggested, but that's the way it is right
    now. Thoughts?

    WT
     
    Wayne Tiffany, May 4, 2005
    #1
  2. Wayne Tiffany

    CS Guest

    Try saving the weldment itself out to separate parts by adding a split
    feature. Then Replace the part file of the weldment with the assembly
    file that contains the separate parts. you could go further to disolve
    the sub-assembly to have all parts on the top level.

    Corey
     
    CS, May 4, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. weldment in 2004

  2. 2004 weldment drawings

  3. Weldment feature review

  4. Weldment feature density values

  5. weldment profiles

  6. Can I do an exploded view in a weldment part?

  7. Reordering Weldment Cutlist items?

  8. Reorder Weldment Cutlist items?

Loading...