SW printing macro

Discussion in 'SolidWorks' started by Wayne Tiffany, Feb 21, 2005.

  1. Wayne Tiffany

    Wayne Tiffany Guest

    Has anyone done a simple printing macro that takes the current drawing and
    prints it to 11 x 17 landscape fit? This is a pretty common thing to do
    here as most of the "desk" copies are that size. I have one that I use that
    is run by an external macro program, but I was thinking that a simple,
    internal SW macro that everyone could use would be of some value.

    WT
     
    Wayne Tiffany, Feb 21, 2005
    #1
  2. Wayne Tiffany

    CS Guest

    I have one you could modify it is setup for 8 X 10 right now and for a
    couple of our printers. It changes the settings to Fit to paper size and
    sets a last plot date footer. I will e-mail it.

    Corey
     
    CS, Feb 22, 2005
    #2
  3. Wayne Tiffany

    CS Guest

    I sent it.
     
    CS, Feb 22, 2005
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. dimension macro

  2. Can't enter printer name in macro

  3. ACAD LT 2004 macro problem

  4. Printing from Virtuoso (or printing GDSII)

  5. Call a macro from another macro?

  6. Macro to rerun a macro

  7. Is it possible to run a macro file from another macro file?

  8. Printing Says 11x17 but its printing 8x11

Loading...