SW and multiple cores

Jon,

I did give three separate quotes of yours where you give conflicting
reasons why you broke your agreement with the author.

If I got it wrong please explain out of the three reasons you gave,
which one is the truth.

Tom

 

So now some 6+ months down the road, you JUST NOW are implying that

Only an idiot like you, Brewer would not see Folini for what he is...
a cadcam salesman.

Only and idiot like you, Brewer failed to notice that Folini claimed
Italians make the most powerful racing engines and my response to his
rubbish.

Face it Brewer, you're a clueless Usenet stalker who makes tons of
mistakes. Get a life asshole. It's not my job to educate a dumb ass
like you or even get you up to speed.


Ignorant:

"Jon, I never forgot any of your postings about SDRC I made the wrong
decision in spite of what you said. There have been a number of times
that my Wife has told me to be careful in dealing with someone and
after words says "I told you so". She earned the right to say it as
well as you have earned the right to say I TOLD YOU SO. I made a
decision that went against my better judgment and as usual it turned
out poorly." .... Tom Brewer

Ignorant:

"I do not purchase programs unless I know before hand that they are
what I want and/ or need."... Tom Brewer who can't follow his own
advice. See above.

Ignorant:

Tom Brewer thinking he and his pals like Joe788 can play their Usenet
staking games, lie on a repeated basis and suffer no consequences for
doing so.

Ignorant:

"I have shot myself in the foot, not an easy thing to do when it is
in your mouth and your head is in your ass."... Tom Brewer admitting
what he's often like.

Ignorant:

Someone who has a proven track record of not being able to deal with
or accept the kind of change that occurs in the cadcam market... now
that's ignorant or should we say that's Tom Brewer.

Ignorant:

Someone who doesn't live in San Diego yet insists there is no shortage
of CNC machinists here... now that's ignorant or should we say that's
Tom Brewer.

Ignorant:

Someone who criticizes someone on SolidWorks but has never helped
anyone with specific SolidWorks answers. Someone who is not able to
answer any questions that "Vinny" had on master modeling or skeletal
modeling. Someone who has never posted any models they have done...
now that's ignorant or should we say that's Tom Brewer.

Ignorant:

Tom Brewer's failure to understand who Matt Lombard really is.

Ignorant:

Tom Brewer's unable to comprehend what's on the cover of the
SolidWorks Bible:

"Whether you're a new, intermediate, ...."

Ignorant:

Someone who can't understand more than a simple "I love it!" or "I
hate it!" type of comment ... now that's ignorant or should we say
that's Tom Brewer.

Ignorant:

Tom Brewer implies that because you acknowledge that the $25
SolidWorks course covers subjects / topics that the $650 SolidWorks
course didn't that you're now somehow an idiot and got screwed when
you decided to purchase the $650 SolidWorks course.

Tom Brewer Writing About SmartCAM:

"I ended up paying a consultant $40.00 per hour for two weeks."

"FYI, when I said "Solid modeling" in reference to SmartCam it was
tongue in cheek. What you could not see is that when I was typing that
I was laughing to myself. Anyone that uses SmartCam and Solid
Modeling in the same sentence cannot be taken seriously."

Recently Tom Brewer said SmartCAM had no user interface problems and
yet the record shows Tom Brewer thinks SmartCAM does indeed have user
interface problems:

"The only real problem that I run into is that the screen can get
cluttered and it becomes difficult to pick and choose elements in Free
Form. I just use the utility masking feature to hide what is in the
way, that cures the problem but it does add work (I tried the snap
filtering and snap options but for me it was not the best way), I
have seen other packages that handle picking and choosing in better."

Conclusion:

Tom Brewer thinks he's a SolidWorks expert. A SolidWorks expert is
someone who knows more and more about less and less until he knows
absolutely everything about nothing.


Jon Banquer
San Diego, CA

 

Madcowman = excrement chomper

Now it's correct Madcowman.

Jon Banquer
San Diego,CA

 

So Jon, you didn't know what Folini was before you made your agreement
and he posted your comments on his blog?

In your book Jon its OK to make an agreement and then promptly break
that agreement once you get what so long as its a salesman you lied
to?

Tom

 

Who gives a shit Jon, what does this have to do with your lying to the
man and then lying repeatedly about why you did it?

Tom

 

you want

 

I may have tried to warn him <shrug>.

"Please let me clarify that Jon is not affiliated with HSMWorks ApS in any way
and that we cannot control what people are writing on the web."
"Anybody can get evaluation licenses of HSMWorks and test it themselves."
"I hope this clarifies any doubt."

"I can't even mention HSMWorks without them getting complaints about me." -
Feb 22 2008 by jon banquer

 

Poor clueless seems utterly clueless even as to what they actually do
& sell as well as their business model.

BTW, Perhaps he's annoyed that Franco has a degree in IT while
clueless got kicked out of HS with not even a drop of shop math.
Anybody else wonder what he actually took in that claimed HS?
Perhaps he majored in Drivers Ed. One would think that if he
took it 3 oor four times he might at last pass & learn how to drive
(without hitting pedestrians or using stolen cars).
OTOH Perhaps he's not to drive at all with the Lithium & stuff.

 

Usefull words of machining & CAD wisdom from clueless:
[]
[
"You don't love what your crack whore mother does to you? Does it have
something to do with how much your father laughs at you while your
bent over taking it in the ass? Being on your knees taking it in the
ass is your natural position. Suggest you be proud of who you and your
mother are." -Jon Banquer-

"You back up when your crack whore mother fucks you in the ass with
here strap-on." - Jon Banquer-

"Speaking of sharing. Your father shares your crack whore mother with
anyone who has $5." -Jon Banquer -

"How about using your crack whore mother? Everyone else does." -Jon
Banquer-

"I OWN you! You ain't worth much but I make the most of your worthless
ass. Now get back on your knees you dumb ****." -Jon Banquer -

"Suggest you shut the **** up already and take what your crack whore
mother is giving you without squealing like a little pig. You're my
bitch and I own you. Suggest you accept reality for once and deal with
it." -Jon Banquer-

"Has something to do with being born to a crack whore mother and
having no idea who his daddy really is. At least he knows he's my
bitch and I enjoy using him on a daily
basis." -Jon Banquer -

"inches of strap-on dildo that your crack whore mother shoved up your
ass as you begged you father to tell her to stop." -Jon Banquer-

"The only thing bottom of the barrel is where these motherfuckers will
be found by the time I'm done fucking with them." -Jon Banquer-

"Figure it out for yourself or have your worthless crack whore mother
explain it to you while your father is pimping her out to John
Carroll." - Jon Banquer-

"Here is your "apology": **** off and die you worthless, lying fucking
drunk." -Jon Banquer-

"Yeah, I'll get right on spending my time educating a dumb mother
fucker like you right away. You will get what I choose to give you
when I choose to give it to you, bitch. -Jon Banquer-

"You really need to stop sucking dick Numb Nutz. Seriously you're a
major loser" Jon Banquer

"Your crack whore mother going down on anyone who might give her $5"
-Jon Banquer-

"Let me explain what humiliation is to you since you're so fucking
stupid that you have no clue what humiliation really is. Humiliation
is you being sodomized by your mother wearing a strap-on.
Did your father suck off your mother's strap-on before she sodomized
you?" - Jon Banquer-

"Now do what you do best and go back to playing with your nuts, son."
- Jon Banquer

"Seems like you wanna talk about you crack addicted whore of a mother
who fucks you in the ass with her strap-on instead." -Jon Banquer-

"I'm sure your crack addicted whore mother always tells you she loves
you when you're bent over and hiding your face in shame in the corner.
Do you tell her how successful you are and how many seats Mastercam
has sold? Do you think she cares? Is this the reason you now prefer
men? " -Jon Banquer-

"WWWWWWWWWWWWWWWAAAAAAAAAAAAAAaaaaaaaaaaaaaaa... the sound you make
when your cracked addicted whore mother rapes you over and over and
over again." -Jon Banquer-

"Are you happy with the position your crack addicted whore mother puts
you in when she fucks you in the ass with her strap-on? You like being
bent over and taking it in the ass don't you? " -Jon Banquer-

"Why? You prefer men. The only exception you make is for your crack
addicted whore of a mother. " -Jon Banquer-

"Squeal like the raped little bitch your crack addicted whore mother
turned you into. It's so you! " -Jon Banquer-

"Your crack addicted whore mother cums hard when she has you in the
position she loves you to be in... on your knees in a corner squealing
like the lying little pig that you are. " -Jon Banquer-

"I feel sorry for your mother or whatever you call that crack whore
that spit you out." -Jon Banquer-

"Your mother does anyone. That's what happens when you're a crack
whore. Proud of her are you?" -Jon Banquer -

"You have every right to be proud of your crack whore mother. Look how
long she's been in business."-Jon Banquer-

"Of course that pails in comparison to your crack whore mother who is
still open for business 24/7/365. " - Jon Banquer -
]

HTH

 

Pretty simple: He lied three times.

 

YOU don't seem to know much of anything about SolidWorks.
16 hours of claimed intro training videos (still watching them?)
and you are stil utterly clueless per all the bad & misinformed
"advice" (buzzwords you heard on the videos?) you spouted
(and actual users caught you on).
But then, as usual, you shut up as you could not put up
(and we all know it). Your standard MO with your BS & tripe.
You'd not even be able to model a simple Cranfield Object
with hand holding.

 

Now it's correct Madcowman

Jon Banquer
San Diego, CA

 

So Jon, you didn't know what Folini was before you made your agreement

It's called an interview, Brewer. An interview is something no one has
ever been interested in doing with you, Brewer because you have
absolutely nothing to say in regards to CADCAM. Perhaps one day
someone will want to interview an idiot like you who makes tons of
mistakes and has no innovative ideas. In that case you would be on the
top of the list along with your mentor Cliff Huprich who has never
even used SolidWorks, is totally unemployable and couldn't machine his
way out of a paper bag.

Hope this helps,


Jon Banquer
San Diego, CA

 

Who gives a shit Jon...

No one gives a shit about what your stalking nonsense and your lies,
Brewer. Same goes with you mentor Cliff Huprich.

Hope this helps,

Jon Banquer
San Diego, CA

 

I believe that you also fit this same MO then Jonnie, as you continually
lie about your real location (and post with numerous aliases).

These are yours, aren't they?


Topdownbydesign
OS Noir
Frank Booth, jr
dominantjon
Mr.X
jbtech
Clinton Upyers
Haywood Jablowme
Normand Blais


jon banquer


Brian Winters
Johnny Stevenson
Joe789
J0e788
Former Heavy Industries Employee
donl517
James Jessup

Troll Killer

Not bad for the pussy your are Jonnie!

gk

 

Partial list of jb's clueless aliases (may have duplicates):
[
Topdownbydesign
OS Noir
Frank Booth, jr
dominantjon
John-Who ?

Mr.X
jbtech
Clinton Upyers ?
Haywood Jablowme

Normand Blais


jon banquer



Topdownbydesign
OS Noir
Frank Booth, jr
dominantjon
Mr.X
jbtech
Clinton Upyers
Haywood Jablowme
Normand Blais


jon banquer

Brian Winters
donl517
Johnny Stevenson

Joe789
J0e788

Topdownbydesign
OS Noir
Frank Booth, jr
dominantjon
Mr.X
jbtech
Clinton Upyers
Haywood Jablowme
Normand Blais


jon banquer


Brian Winters
Johnny Stevenson
Joe789
J0e788
Former Heavy Industries Employee
donl517
James Jessup

Troll Killer
Former Heavy Industries Employee
]

HTH

 

gk,
It's actually "Jonathan".
He even likes to lie about that.
The better searches use "Jonathan" <G>.

 

Unlike a clueless & confused BS artist full of buzzword hype from
ads for things he's never ever used Tom actually uses software.

Which of the voices said that? LOL .... you are well known among
most vendors & developers for stupidity & cluelessness.
The rest catch on too.

Is it a full CAD/CAM system?

Got fired again, eh? Two weeks this time? One? Two days?
Not even one day?

And you got those Aluminum blocks how precise with a flycutter
on a standard manual BP? At what temp?
And had to leave that job in a hurry a few days later ... LOL ....

You'd have problems with two holes in a bit of cold rolled, no
matter how long you kept "editing" the "program".

<Snicker>.

Why don't you ever post about machining (beyond "double drilling 'cause
the holes were wrong" & "I dull my shop's $$$ reamers with a diamond hone")?
Or get ANYTHING right ever (on your own) about CAD? Or have a clue
what CAD/CAM is?

BTW, Edited g-code is not associative to the CAD or CAD/CAM models
no matter how much you edit it to correct your simple 2 1/2 axes blunders.

Rotten gave you the heave how long ago?

 

It looks better now <VBG>.

 

Jon,

So now your saying when someone promises to "interview" you and posts
your comments to his blog you don't have to be honest and keep your
promises dealing with him?

Where exactly did this "interview" take place, where did you guys
meet? Oh! that's right you didn't.

So did he send you questions via email and you responded in kind and
he then posted your comments to his blog? Would have been funnier if
he didn't let you use your crib notes.

Tom