SW and multiple cores

I know the subject has been beaten quite a bit...

Right now, I'm waiting for SW to let me work again. I see in the task
manager only one core (Core 2 6700) working 100%, the other idle. (assy and
drawing of the same)

While waiting, I am wondering if latest versions of SW (I'm on '06) make use
of multiple cores.

 

Ah, yes, this is why I love this place. Clueless fucks can say whatever
they like without any evidence whatsoever.

It really depends on the types of models you make. Drawings and
assemblies are becoming more mtil-threaded every release. I've heard one
of these people that Bangqueer quotes all the time say that surface
models and multibodies make good use of multiprocessors.

Daisy

 

Ah, yes, this is why I love this place. Clueless fucks can say whatever

Which is why you have to resort to posting with numerous aliases.

ROTFLMFAO

Jon Banquer
San Diego,CA

 

[
Franco Folini

UPDATE -- July 8, 2007 -- I had to close this blog post to further
comments and to remove the personal attacks between Jon and some other
newsgroups readers. Before the interview, I made an agreement with Jon
about the style of the interview and the way to handle it. Jon didn't
respect our agreement, posting comments under fake names. Jon's
authentic and fake comments are all posted from the same IP address,
72.199.251.224. I can now see that my trust in Jon was misplaced.
] http://blog.novedge.com/2007/07/an-interview-wi.html


Just some of the numerous bandqueer aliases;


Topdownbydesign
OS Noir
Frank Booth, jr
dominantjon
Mr.X
jbtech
Clinton Upyers
Haywood Jablowme
Normand Blais





Brian Winters
Johnny Stevenson
Joe789
J0e788
Former Heavy Industries Employee
donl517
James Jessup

Troll Killer
Mr. Stan Nowicki

 

Franco Folini.

Is a CADCAM salesman. Imagine someone getting even with a CADCAM
salesman instead of being taken advantage of one. See your quotes
below that show how stupid you are, Brewer.

ROTFLMFAO

Ignorant:

"Jon, I never forgot any of your postings about SDRC I made the wrong
decision in spite of what you said. There have been a number of times
that my Wife has told me to be careful in dealing with someone and
after words says "I told you so". She earned the right to say it as
well as you have earned the right to say I TOLD YOU SO. I made a
decision that went against my better judgment and as usual it turned
out poorly." .... Tom Brewer

Ignorant:

"I do not purchase programs unless I know before hand that they are
what I want and/ or need."... Tom Brewer who can't follow his own
advice. See above.

Ignorant:

Tom Brewer thinking he and his pals like Joe788 can play their Usenet
staking games, lie on a repeated basis and suffer no consequences for
doing so.

Ignorant:

"I have shot myself in the foot, not an easy thing to do when it is
in your mouth and your head is in your ass."... Tom Brewer admitting
what he's often like.

Ignorant:

Someone who has a proven track record of not being able to deal with
or accept the kind of change that occurs in the cadcam market... now
that's ignorant or should we say that's Tom Brewer.

Ignorant:

Someone who doesn't live in San Diego yet insists there is no shortage
of CNC machinists here... now that's ignorant or should we say that's
Tom Brewer.

Ignorant:

Someone who criticizes someone on SolidWorks but has never helped
anyone with specific SolidWorks answers. Someone who is not able to
answer any questions that "Vinny" had on master modeling or skeletal
modeling. Someone who has never posted any models they have done...
now that's ignorant or should we say that's Tom Brewer.

Ignorant:

Tom Brewer's failure to understand who Matt Lombard really is.

Ignorant:

Tom Brewer's unable to comprehend what's on the cover of the
SolidWorks Bible:

"Whether you're a new, intermediate, ...."

Ignorant:

Someone who can't understand more than a simple "I love it!" or "I
hate it!" type of comment ... now that's ignorant or should we say
that's Tom Brewer.

Ignorant:

Tom Brewer implies that because you acknowledge that the $25
SolidWorks course covers subjects / topics that the $650 SolidWorks
course didn't that you're now somehow an idiot and got screwed when
you decided to purchase the $650 SolidWorks course.

Tom Brewer Writing About SmartCAM:

"I ended up paying a consultant $40.00 per hour for two weeks."

"FYI, when I said "Solid modeling" in reference to SmartCam it was
tongue in cheek. What you could not see is that when I was typing that
I was laughing to myself. Anyone that uses SmartCam and Solid
Modeling in the same sentence cannot be taken seriously."

Recently Tom Brewer said SmartCAM had no user interface problems and
yet the record shows Tom Brewer thinks SmartCAM does indeed have user
interface problems:

"The only real problem that I run into is that the screen can get
cluttered and it becomes difficult to pick and choose elements in Free
Form. I just use the utility masking feature to hide what is in the
way, that cures the problem but it does add work (I tried the snap
filtering and snap options but for me it was not the best way), I
have seen other packages that handle picking and choosing in better."

Conclusion:

Tom Brewer thinks he's a SolidWorks expert. A SolidWorks expert is
someone who knows more and more about less and less until he knows
absolutely everything about nothing.


Jon Banquer
San Diego, CA

 

"Please let me clarify that Jon is not affiliated with HSMWorks ApS in any way
and that we cannot control what people are writing on the web."
"Anybody can get evaluation licenses of HSMWorks and test it themselves."
"I hope this clarifies any doubt."

 

Franco Folini.

Was it a CADCAM salesmen like Folini who sold you Artisan, Brewer? I
got a free interview. You got taken for a costly ride. It wasn't the
first time, Brewer and it sure won't be the last time, sucker.

Ignorant:

"Jon, I never forgot any of your postings about SDRC I made the wrong
decision in spite of what you said. There have been a number of times
that my Wife has told me to be careful in dealing with someone and
after words says "I told you so". She earned the right to say it as
well as you have earned the right to say I TOLD YOU SO. I made a
decision that went against my better judgment and as usual it turned
out poorly." .... Tom Brewer

Ignorant:

"I do not purchase programs unless I know before hand that they are
what I want and/ or need."... Tom Brewer who can't follow his own
advice. See above.

Ignorant:

Tom Brewer thinking he and his pals like Joe788 can play their Usenet
staking games, lie on a repeated basis and suffer no consequences for
doing so.

Ignorant:

"I have shot myself in the foot, not an easy thing to do when it is
in your mouth and your head is in your ass."... Tom Brewer admitting
what he's often like.

Ignorant:

Someone who has a proven track record of not being able to deal with
or accept the kind of change that occurs in the cadcam market... now
that's ignorant or should we say that's Tom Brewer.

Ignorant:

Someone who doesn't live in San Diego yet insists there is no shortage
of CNC machinists here... now that's ignorant or should we say that's
Tom Brewer.

Ignorant:

Someone who criticizes someone on SolidWorks but has never helped
anyone with specific SolidWorks answers. Someone who is not able to
answer any questions that "Vinny" had on master modeling or skeletal
modeling. Someone who has never posted any models they have done...
now that's ignorant or should we say that's Tom Brewer.

Ignorant:

Tom Brewer's failure to understand who Matt Lombard really is.

Ignorant:

Tom Brewer's unable to comprehend what's on the cover of the
SolidWorks Bible:

"Whether you're a new, intermediate, ...."

Ignorant:

Someone who can't understand more than a simple "I love it!" or "I
hate it!" type of comment ... now that's ignorant or should we say
that's Tom Brewer.

Ignorant:

Tom Brewer implies that because you acknowledge that the $25
SolidWorks course covers subjects / topics that the $650 SolidWorks
course didn't that you're now somehow an idiot and got screwed when
you decided to purchase the $650 SolidWorks course.

Tom Brewer Writing About SmartCAM:

"I ended up paying a consultant $40.00 per hour for two weeks."

"FYI, when I said "Solid modeling" in reference to SmartCam it was
tongue in cheek. What you could not see is that when I was typing that
I was laughing to myself. Anyone that uses SmartCam and Solid
Modeling in the same sentence cannot be taken seriously."

Recently Tom Brewer said SmartCAM had no user interface problems and
yet the record shows Tom Brewer thinks SmartCAM does indeed have user
interface problems:

"The only real problem that I run into is that the screen can get
cluttered and it becomes difficult to pick and choose elements in Free
Form. I just use the utility masking feature to hide what is in the
way, that cures the problem but it does add work (I tried the snap
filtering and snap options but for me it was not the best way), I
have seen other packages that handle picking and choosing in better."

Conclusion:

Tom Brewer thinks he's a SolidWorks expert. A SolidWorks expert is
someone who knows more and more about less and less until he knows
absolutely everything about nothing.


Jon Banquer
San Diego, CA

 

So your lies were about sales?

"Please let me clarify that Jon is not affiliated with HSMWorks ApS in any way
and that we cannot control what people are writing on the web."
"Anybody can get evaluation licenses of HSMWorks and test it themselves."
"I hope this clarifies any doubt."

HTH

 

Jon,

So your now saying you broke your agreement with Folini to get even
with a CAD/CAM salesman? If it is now OK for you to lie because you
were "getting even" why did you originally deny you did it when you
got caught and it first came to light?

Now your excuse for lying and breaking your agreement with Folini
changes again Jon. You thus far give three excuses for lying after you
originally denied you posted fake comments under false names to the
public comments section on your interview in violation of your
agreement with Folini.

Since all three of your evolving excuses are different which one is
NOW the truth according to Jon Banquer?

Tom

 

That as per usual you got it wrong and that you're an idiot.

Ignorant:

"Jon, I never forgot any of your postings about SDRC I made the wrong
decision in spite of what you said. There have been a number of times
that my Wife has told me to be careful in dealing with someone and
after words says "I told you so". She earned the right to say it as
well as you have earned the right to say I TOLD YOU SO. I made a
decision that went against my better judgment and as usual it turned
out poorly." .... Tom Brewer

Ignorant:

"I do not purchase programs unless I know before hand that they are
what I want and/ or need."... Tom Brewer who can't follow his own
advice. See above.

Ignorant:

Tom Brewer thinking he and his pals like Joe788 can play their Usenet
staking games, lie on a repeated basis and suffer no consequences for
doing so.

Ignorant:

"I have shot myself in the foot, not an easy thing to do when it is
in your mouth and your head is in your ass."... Tom Brewer admitting
what he's often like.

Ignorant:

Someone who has a proven track record of not being able to deal with
or accept the kind of change that occurs in the cadcam market... now
that's ignorant or should we say that's Tom Brewer.

Ignorant:

Someone who doesn't live in San Diego yet insists there is no shortage
of CNC machinists here... now that's ignorant or should we say that's
Tom Brewer.

Ignorant:

Someone who criticizes someone on SolidWorks but has never helped
anyone with specific SolidWorks answers. Someone who is not able to
answer any questions that "Vinny" had on master modeling or skeletal
modeling. Someone who has never posted any models they have done...
now that's ignorant or should we say that's Tom Brewer.

Ignorant:

Tom Brewer's failure to understand who Matt Lombard really is.

Ignorant:

Tom Brewer's unable to comprehend what's on the cover of the
SolidWorks Bible:

"Whether you're a new, intermediate, ...."

Ignorant:

Someone who can't understand more than a simple "I love it!" or "I
hate it!" type of comment ... now that's ignorant or should we say
that's Tom Brewer.

Ignorant:

Tom Brewer implies that because you acknowledge that the $25
SolidWorks course covers subjects / topics that the $650 SolidWorks
course didn't that you're now somehow an idiot and got screwed when
you decided to purchase the $650 SolidWorks course.

Tom Brewer Writing About SmartCAM:

"I ended up paying a consultant $40.00 per hour for two weeks."

"FYI, when I said "Solid modeling" in reference to SmartCam it was
tongue in cheek. What you could not see is that when I was typing that
I was laughing to myself. Anyone that uses SmartCam and Solid
Modeling in the same sentence cannot be taken seriously."

Recently Tom Brewer said SmartCAM had no user interface problems and
yet the record shows Tom Brewer thinks SmartCAM does indeed have user
interface problems:

"The only real problem that I run into is that the screen can get
cluttered and it becomes difficult to pick and choose elements in Free
Form. I just use the utility masking feature to hide what is in the
way, that cures the problem but it does add work (I tried the snap
filtering and snap options but for me it was not the best way), I
have seen other packages that handle picking and choosing in better."

Conclusion:

Tom Brewer thinks he's a SolidWorks expert. A SolidWorks expert is
someone who knows more and more about less and less until he knows
absolutely everything about nothing.


Jon Banquer
San Diego, CA

 

Jon,

Folini treated you honestly and fairly Jon, his mistake was trusting
Jon Banquer to do the same.

Tom

 

Same old tired repeats from Jonnie. As all of the above are taken out
of context or are old news or both, don't you think you could do just a
little better, oh person of more aliases than most? You really are
pathetic most days, Jonnie no matter whom you are posting as that day.

gk

 

And here's our Jonnie at his best:



"You don't love what your crack whore mother does to you? Does it have
something to do with how much your father laughs at you while your
bent over taking it in the ass? Being on your knees taking it in the
ass is your natural position. Suggest you be proud of who you and your
mother are." -Jon Banquer-

"You back up when your crack whore mother fucks you in the ass with
here strap-on." - Jon Banquer-

"Speaking of sharing. Your father shares your crack whore mother with
anyone who has $5." -Jon Banquer -

"How about using your crack whore mother? Everyone else does." -Jon
Banquer-

"I OWN you! You ain't worth much but I make the most of your worthless
ass. Now get back on your knees you dumb ****." -Jon Banquer -

"Suggest you shut the **** up already and take what your crack whore
mother is giving you without squealing like a little pig. You're my
bitch and I own you. Suggest you accept reality for once and deal with
it." -Jon Banquer-

"Has something to do with being born to a crack whore mother and
having no idea who his daddy really is. At least he knows he's my
bitch and I enjoy using him on a daily
basis." -Jon Banquer -

"inches of strap-on dildo that your crack whore mother shoved up your
ass as you begged you father to tell her to stop." -Jon Banquer-

"The only thing bottom of the barrel is where these motherfuckers will
be found by the time I'm done fucking with them." -Jon Banquer-

"Figure it out for yourself or have your worthless crack whore mother
explain it to you while your father is pimping her out to John
Carroll." - Jon Banquer-

"Here is your "apology": **** off and die you worthless, lying fucking
drunk." -Jon Banquer-

"Yeah, I'll get right on spending my time educating a dumb mother
fucker like you right away. You will get what I choose to give you
when I choose to give it to you, bitch. -Jon Banquer-

"You really need to stop sucking dick Numb Nutz. Seriously you're a
major loser" Jon Banquer

"Your crack whore mother going down on anyone who might give her $5"
-Jon Banquer-

"Let me explain what humiliation is to you since you're so fucking
stupid that you have no clue what humiliation really is. Humiliation
is you being sodomized by your mother wearing a strap-on.
Did your father suck off your mother's strap-on before she sodomized
you?" - Jon Banquer-

"Now do what you do best and go back to playing with your nuts, son."
- Jon Banquer

"Seems like you wanna talk about you crack addicted whore of a mother
who fucks you in the ass with her strap-on instead." -Jon Banquer-

"I'm sure your crack addicted whore mother always tells you she loves
you when you're bent over and hiding your face in shame in the corner.
Do you tell her how successful you are and how many seats Mastercam
has sold? Do you think she cares? Is this the reason you now prefer
men? " -Jon Banquer-

"WWWWWWWWWWWWWWWAAAAAAAAAAAAAAaaaaaaaaaaaaaaa... the sound you make
when your cracked addicted whore mother rapes you over and over and
over again." -Jon Banquer-

"Are you happy with the position your crack addicted whore mother puts
you in when she fucks you in the ass with her strap-on? You like being
bent over and taking it in the ass don't you? " -Jon Banquer-

"Why? You prefer men. The only exception you make is for your crack
addicted whore of a mother. " -Jon Banquer-

"Squeal like the raped little bitch your crack addicted whore mother
turned you into. It's so you! " -Jon Banquer-

"Your crack addicted whore mother cums hard when she has you in the
position she loves you to be in... on your knees in a corner squealing
like the lying little pig that you are. " -Jon Banquer-

"I feel sorry for your mother or whatever you call that crack whore
that spit you out." -Jon Banquer-

"Your mother does anyone. That's what happens when you're a crack
whore. Proud of her are you?" -Jon Banquer -

"You have every right to be proud of your crack whore mother. Look how
long she's been in business."-Jon Banquer-

"Of course that pails in comparison to your crack whore mother who is
still open for business 24/7/365. " - Jon Banquer -

Now, we are all reminded again just what a sweetheart Jonnie can be.

gk

 

The only one around here that continually "gets is wrong" is you Jonnie.

Here are some more quotes from Wonder Boy:

On Wed, 19 Dec 2007 20:02:08 -0800 (PST), jon_banquer

Jonnie just gets better and better.

gk

 

Got it wrong eh!

First you said you broke your agreement with the author because:

1) it would waste massive amounts of your time to post as yourself.

Then you changed your reason for breaking your agreement with the
author to:

2) give posters a taste of their own medicine.

Then now here you are saying you broke your agreement with the author
to:

3) get even with a CAD/DAM salesman.

***********************
[
http://blog.novedge.com/2007/07/an-interview-wi.html

Jon didn't respect our agreement, posting comments under fake
names. Jon's authentic and fake comments are all posted from the same
IP address, <snipped IP Address> I can now see that my trust in Jon
was misplaced.
] -Frank Folini-

**************************

Then when you got caught Jon and exposed for violating your agreement
with the author you couldn't keep your excuses straight:

(Excuse #1)

[
"Why not just use your real name instead of stooping to their level?"

Because it can't be done without wasting massive amounts of my time!
]
-Jon Banquer on Jul 9 2007

Then you said:

(Excuse #2)

[
I figured for once I'd give these posters a taste or their own
medicine which seemed to anger the host of the Blog who had elected to
go with an unmoderated format.
]
-Jon Banquer- July 18, 2007-

(Excuse #3)

[
Imagine someone getting even with a CADCAM salesman
]
-Jon Banquer - March 4, 2008

So Jon, out of your three separate and distinctly different excuses,
which one is the truth?

Tom

 

Folini treated you honestly

How do you know this, Brewer? You have no idea what went down between
Folini and myself. What we do know is your track record shows you to
be a complete idiot.

Ignorant:

"Jon, I never forgot any of your postings about SDRC I made the wrong
decision in spite of what you said. There have been a number of times
that my Wife has told me to be careful in dealing with someone and
after words says "I told you so". She earned the right to say it as
well as you have earned the right to say I TOLD YOU SO. I made a
decision that went against my better judgment and as usual it turned
out poorly." .... Tom Brewer

Ignorant:

"I do not purchase programs unless I know before hand that they are
what I want and/ or need."... Tom Brewer who can't follow his own
advice. See above.

Ignorant:

Tom Brewer thinking he and his pals like Joe788 can play their Usenet
staking games, lie on a repeated basis and suffer no consequences for
doing so.

Ignorant:

"I have shot myself in the foot, not an easy thing to do when it is
in your mouth and your head is in your ass."... Tom Brewer admitting
what he's often like.

Ignorant:

Someone who has a proven track record of not being able to deal with
or accept the kind of change that occurs in the cadcam market... now
that's ignorant or should we say that's Tom Brewer.

Ignorant:

Someone who doesn't live in San Diego yet insists there is no shortage
of CNC machinists here... now that's ignorant or should we say that's
Tom Brewer.

Ignorant:

Someone who criticizes someone on SolidWorks but has never helped
anyone with specific SolidWorks answers. Someone who is not able to
answer any questions that "Vinny" had on master modeling or skeletal
modeling. Someone who has never posted any models they have done...
now that's ignorant or should we say that's Tom Brewer.

Ignorant:

Tom Brewer's failure to understand who Matt Lombard really is.

Ignorant:

Tom Brewer's unable to comprehend what's on the cover of the
SolidWorks Bible:

"Whether you're a new, intermediate, ...."

Ignorant:

Someone who can't understand more than a simple "I love it!" or "I
hate it!" type of comment ... now that's ignorant or should we say
that's Tom Brewer.

Ignorant:

Tom Brewer implies that because you acknowledge that the $25
SolidWorks course covers subjects / topics that the $650 SolidWorks
course didn't that you're now somehow an idiot and got screwed when
you decided to purchase the $650 SolidWorks course.

Tom Brewer Writing About SmartCAM:

"I ended up paying a consultant $40.00 per hour for two weeks."

"FYI, when I said "Solid modeling" in reference to SmartCam it was
tongue in cheek. What you could not see is that when I was typing that
I was laughing to myself. Anyone that uses SmartCam and Solid
Modeling in the same sentence cannot be taken seriously."

Recently Tom Brewer said SmartCAM had no user interface problems and
yet the record shows Tom Brewer thinks SmartCAM does indeed have user
interface problems:

"The only real problem that I run into is that the screen can get
cluttered and it becomes difficult to pick and choose elements in Free
Form. I just use the utility masking feature to hide what is in the
way, that cures the problem but it does add work (I tried the snap
filtering and snap options but for me it was not the best way), I
have seen other packages that handle picking and choosing in better."

Conclusion:

Tom Brewer thinks he's a SolidWorks expert. A SolidWorks expert is
someone who knows more and more about less and less until he knows
absolutely everything about nothing.


Jon Banquer
San Diego, CA

 

Got it wrong eh!

You get lots of stuff wrong, Brewer. See below.

Ignorant:

"Jon, I never forgot any of your postings about SDRC I made the wrong
decision in spite of what you said. There have been a number of times
that my Wife has told me to be careful in dealing with someone and
after words says "I told you so". She earned the right to say it as
well as you have earned the right to say I TOLD YOU SO. I made a
decision that went against my better judgment and as usual it turned
out poorly." .... Tom Brewer

Ignorant:

"I do not purchase programs unless I know before hand that they are
what I want and/ or need."... Tom Brewer who can't follow his own
advice. See above.

Ignorant:

Tom Brewer thinking he and his pals like Joe788 can play their Usenet
staking games, lie on a repeated basis and suffer no consequences for
doing so.

Ignorant:

"I have shot myself in the foot, not an easy thing to do when it is
in your mouth and your head is in your ass."... Tom Brewer admitting
what he's often like.

Ignorant:

Someone who has a proven track record of not being able to deal with
or accept the kind of change that occurs in the cadcam market... now
that's ignorant or should we say that's Tom Brewer.

Ignorant:

Someone who doesn't live in San Diego yet insists there is no shortage
of CNC machinists here... now that's ignorant or should we say that's
Tom Brewer.

Ignorant:

Someone who criticizes someone on SolidWorks but has never helped
anyone with specific SolidWorks answers. Someone who is not able to
answer any questions that "Vinny" had on master modeling or skeletal
modeling. Someone who has never posted any models they have done...
now that's ignorant or should we say that's Tom Brewer.

Ignorant:

Tom Brewer's failure to understand who Matt Lombard really is.

Ignorant:

Tom Brewer's unable to comprehend what's on the cover of the
SolidWorks Bible:

"Whether you're a new, intermediate, ...."

Ignorant:

Someone who can't understand more than a simple "I love it!" or "I
hate it!" type of comment ... now that's ignorant or should we say
that's Tom Brewer.

Ignorant:

Tom Brewer implies that because you acknowledge that the $25
SolidWorks course covers subjects / topics that the $650 SolidWorks
course didn't that you're now somehow an idiot and got screwed when
you decided to purchase the $650 SolidWorks course.

Tom Brewer Writing About SmartCAM:

"I ended up paying a consultant $40.00 per hour for two weeks."

"FYI, when I said "Solid modeling" in reference to SmartCam it was
tongue in cheek. What you could not see is that when I was typing that
I was laughing to myself. Anyone that uses SmartCam and Solid
Modeling in the same sentence cannot be taken seriously."

Recently Tom Brewer said SmartCAM had no user interface problems and
yet the record shows Tom Brewer thinks SmartCAM does indeed have user
interface problems:

"The only real problem that I run into is that the screen can get
cluttered and it becomes difficult to pick and choose elements in Free
Form. I just use the utility masking feature to hide what is in the
way, that cures the problem but it does add work (I tried the snap
filtering and snap options but for me it was not the best way), I
have seen other packages that handle picking and choosing in better."

Conclusion:

Tom Brewer thinks he's a SolidWorks expert. A SolidWorks expert is
someone who knows more and more about less and less until he knows
absolutely everything about nothing.


Jon Banquer
San Diego, CA

 

Jonnie just gets better and better.

Unlike you who stays the same Nuts son. 10 years of almost totally
useless posts to Usenet with nothing to say. In fact almost all of
your posts are responses to mine because you have so little to say.
Your a loser Nuts son.

Jon Banquer
San Diego,CA

 

The only one around here that continually "gets is wrong" is me.

Now it's correct, Nuts son.

Jon Banquer
San Diego,CA

 

Jon,

So now some 6+ months down the road, you JUST NOW are implying that
Folini has not been honest in his dealings with you?

If it is true why are you just now bringing it up?

Me thinks you are being disingenuous.....as usual....there Mr.
Jon-the-donk.

Tom