Surface Modelling

Discussion in 'SolidWorks' started by sivampeta_dheeraj, Aug 19, 2006.

  1. sivampeta_dheeraj

    sivampeta_dheeraj Guest

    I am a fairly regular user of Solidworks.Mostly I design 3d models.I
    would like to learn now surface modelling.What is the best way to
    approach the task? I would appreciate if anyone can give me the
    contours approaching the task in a most useful way.
     
    sivampeta_dheeraj, Aug 19, 2006
    #1
  2. sivampeta_dheeraj

    Jerry Steiger Guest


    Work your way through Ed Eaton's tutorials on http://www.dimontegroup.com/

    You might want to start out with Surfacing for Blockheads under the SWW 2005
    Presentations. Then do Curvy Stuff 101, then 102, 201, 301, and on to Curvy
    Stuff V. Be sure to look at the presenter's notes and go through them in
    slide show mode.

    Jerry Steiger
    Tripod Data Systems
    "take the garbage out, dear"
     
    Jerry Steiger, Aug 20, 2006
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. TLF Power Modelling & Power Simulation

  2. capacitance modelling by a nmos

  3. Power Modelling of embedded SRAM

  4. Modelling an oscillator using Verilog AMS

  5. freeform surface modelling

  6. Pattern a extruded surface around a multi curved surface

  7. Surface Phill.....vs Surface Untrim

Loading...