SUBMINITURE 'D' CONNECTOR CUTOUTS

Discussion in 'SolidWorks' started by Not Necessarily Me, Jul 23, 2004.

  1. Not Necessarily Me

    Not Necessarily Me Guest

    Does anyone know of a good source for the cutout dimensions for these
    connectors? Especially concerned with DB-9 cutout. I need all the
    different types, trapazoid with mounting holes and trapazoid with extended
    slots to clear the mounting posts on connector. I've done a bit of searching
    on the internet and found some good info on the AMP website but they don't
    have any details on the extended slot configuration.

    thanks in advance,
     
    Not Necessarily Me, Jul 23, 2004
    #1
  2. Not Necessarily Me

    Bob P Guest

    Try http://www.digi-key.com/
     
    Bob P, Jul 23, 2004
    #2
  3. Not Necessarily Me

    kenneth b Guest

    if you can get a hard copy of amp catalog, there's information on panel
    cutouts for 5 shell sizes, both front and rear mounting ... pg. 2254 from
    the catalog i no longer have :(


    you won't find slot info though, it's up to you. i use .261" dia slot.
     
    kenneth b, Jul 23, 2004
    #3
  4. Not Necessarily Me

    Not Necessarily Me Guest

    Thanks for your help, I think I already have the pages from the catalog. I
    was looking at .250 dia for the slots, pretty close..
     
    Not Necessarily Me, Jul 23, 2004
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. skill sheet connector warning

  2. Where does WF store electronic / electric connector and component symbol?

  3. ? Best place to find electrical connector models besides 3D content central

  4. 9 way D-type connector 90 degree PCB mount model to download anywhere?

  5. 7/16" RF connector models?

  6. D Type connector cutouts/ Library Features

  7. PCI Connector Model

Loading...