Student edition - need innstallation help

Discussion in 'Pro/Engineer & Creo Elements/Pro' started by AB, Sep 19, 2004.

  1. AB

    AB Guest

    I'm trying to innstall the WF student edition.

    I get the error :

    licence request failed for feature proe- incentive -5
    no such feature exists

    flexlm error: -5,357

    pro will not run and i have to close it

    i have obtained a licence file from ptc

    any suggestions ?

    AB
     
    AB, Sep 19, 2004
    #1
  2. AB

    David Janes Guest

    : I'm trying to innstall the WF student edition.
    :
    : I get the error :
    :
    : licence request failed for feature proe- incentive -5
    : no such feature exists
    :
    : flexlm error: -5,357
    :
    : pro will not run and i have to close it
    :
    : i have obtained a licence file from ptc
    :
    Getting a license file from ptc is a very good thing. When they emailed it to you,
    you should have saved the attachment to a publically accessible folder. When you
    started the install program and went to the next page, it asks for a 'License File
    Path' and gives you a folder icon to browse to the licese file location. Browse to
    where you've stored the license file ptc sent you and all should be well if you
    bought the SE from JourneyEd. Or, at least somebody did. And it was the patched
    version. It's complicated, you know.

    David Janes

    : any suggestions ?
    :

    : AB
    : f
    :
     
    David Janes, Sep 19, 2004
    #2
  3. AB

    Steve Guest

    You can open the license.dat file with a text editor like notepad and
    modifiy it to correct problems.
    When you get - "flexlm -5,357" this is an error code of -5. So if you
    do a search for "flexlm -5" with google or altavista and read the
    different explainations for -5 error you might be able to solve this
    your self.
    See this link:
    http://www.macrovision.com/services/support/enduser/chap13.htm

    Also, if Pro E installed fine you do not need to reinstall just modify
    the license.dat file.
    When you start Pro E and get the error message window maximize the
    window and make you read it all.

    The makers of Flelm:
    http://www.macrovision.com/services/support/index.shtml

    The end user file - basicly the owners manual for flexlm licensing:
    http://www.macrovision.com/services/support/enduser.pdf

    Most of the software problems people have originate with licensing,
    the more you know the better off you will be.

    Steve

    P.S. Flexlm causes a thirst for Windsor Cokes!
     
    Steve, Sep 19, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.