Strange scaling

Discussion in 'AutoCAD' started by topside, Dec 5, 2007.

  1. topside

    topside Guest

    I need help for a strange question:
    My template file is setted in meters with ddunits command and another
    file (named A1) is also setted in the same mode. When i insert A1 file
    in a new dwg started with the template, it as inserted with a scaled
    with a coefficient like 3.28084.
    Why? Please help me...
    Thanks and forgive my English.
     
    topside, Dec 5, 2007
    #1
  2. topside

    Brian Minto Guest

    The conversion from feet to metres is 0.3048 and the conversion from metres
    to feet is 3.28084 Apparently part of drawing was prepared in feet and the
    other part was prepared in metres. Changing ddunits in either part does not
    rescale the text, etc to be appropriately sized for that conversion.
     
    Brian Minto, Dec 6, 2007
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. TOOL PALETTE SCALING

  2. lisp insert command (scaling)

  3. Scaling a block before picking insert point.

  4. Routine or method for scaling multiple blocks; different names & insertion pts?

  5. scaling attribute but not block

  6. Need help in linear scaling of standard cell layout from 130nm to 90mn

  7. scaling

  8. Scaling in Drawing through Jlink

Loading...