Spring Constant in Simulation Elements

Discussion in 'SolidWorks' started by rmontminy, Sep 13, 2005.

  1. rmontminy

    rmontminy Guest

    The 114.3lbs is for 1 inch. Say you only use .05" of travel, multiply
    ..05" X 114.3 to get 5.7lbs. This sound about right. You could verify
    by measuring as mentioned by someone else.
     
    rmontminy, Sep 13, 2005
    #1
  2. rmontminy

    TOP Guest

    The problem is how do you make a coil spring with an OD less than .25
    inch with that rate?
     
    TOP, Sep 14, 2005
    #2
  3. rmontminy

    Sean Dotson Guest

    Sean Dotson, Sep 14, 2005
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Update numbers in a drawing by constant

  2. Add or subtract a constant from selected number text

  3. Constant area polygons/rectangles

  4. How to do simulation/animate for a spring?

  5. Spring Constant in Simulation Elements

  6. spring simulation

  7. How to use the Linear Spring Physical Simulation feature

  8. Efficient way of finding overlapping elements of sets and dispersing those elements b/w the sets

Loading...