Split bodies crashes solidworks

Discussion in 'SolidWorks' started by Jeff, Oct 23, 2006.

  1. Jeff

    Jeff Guest

    I have a part that has a rib cage type inside structure with a 0.070"
    skin on the outside of the part... the ribs were created using weldment
    profiles for the shapes of the ribs and some extrudes for some of the
    trickier rib sections... I first combined all of the weldment
    structural memebers and the extrudes to create one solid body... I next
    went in and placed planes where i wanted to split the rib cage into
    machinable sections... when i go into Insert->Features->Split and
    select my planes for the "Trim Tools" and select my bodies i want to
    spit and hit the accept button, solidworks kicks me to the desktop and
    gives me the following error:

    Microsoft Visual C++ Runtime Library
    Runtime Error!
    Program: C:\Program Files\Solidworks\sldwrks.exe
    R6025
    -pure virtual function call

    We recently made the jump to SW2007 SP1.1 and i never saw this in
    2006... Has anyone else run across this error or can shed some light on
    things to try?!? thanks...

    Jeff
     
    Jeff, Oct 23, 2006
    #1
  2. I get a lot of crashes using the Split feature in 2007 also... VERY
    repeatable with any part that has the issue. I gave up trying to split this
    one part and instead started a bunch of new parts, Insert Part the original
    into it and used cut extrudes to make each file the correct geometry and
    still associative. Had to get the job out... No word from VAR yet- I think
    they're up to their eyeballs with this release.
     
    Kevin Silbert, Oct 24, 2006
    #2
  3. Jeff

    Engineer Guest

    Dear Jeff,

    Try turning off your antvirus if any running and try this feature
    again. If still it is creating crash, send the error log file to
    to let them check the cause of error.

    Regards

    Deepak Gupta
     
    Engineer, Oct 24, 2006
    #3
  4. Jeff

    Jeff Guest

    Thanks for the replies... One thing my VAR suggested was to turn off
    the toolbox, then try to split the part... It didnt help in my
    instance, but he said there was an SPR (not sure the number) where the
    toolbox somehow conflicts with the split bodies thing...If there are
    any other possible fixes, let me know... Thanks again...

    Jeff
     
    Jeff, Oct 24, 2006
    #4
  5. Jeff

    Brian Guest

    Does your split bodies funtion work at all? Ie. simple geometric shapes.
     
    Brian, Oct 24, 2006
    #5
  6. Jeff

    Jeff Guest

    yup, some splits work, some splits don't work... its really quirky...
     
    Jeff, Oct 24, 2006
    #6
  7. Jeff

    Jeff Guest

    I heard back from my VAR in regards to this issue and there is an SPR
    on this... it is SPR 339374... It is going to be "fixed" in service
    pack 2... But that isnt suppose to be out for another couple months...
    So be weary of split bodies till then... Thanks again for the
    responses...

    Jeff
     
    Jeff, Oct 27, 2006
    #7
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.