spectre model file ?

Discussion in 'Cadence' started by selvakumar_in, Oct 27, 2003.

  1. selvakumar_in

    selvakumar_in Guest

    dear all,

    i am new bie to cadence spectre.

    if i want to use hspice level 3 parameters of nmos and pmos,is it
    enough to

    enter the hspice parameters in spectre format with mos3 as level in a
    text file and save it in " .scs " extension and " ON " the read spice
    netlist function on analog design->set up-> environment option.

    or
    i have to convert the hspice level 3 parameters into spectre mos3
    equivalent parameters using spp command

    why i am asking,i am getting some warning like wmlt,lmlt and some
    parameters are not valid in spectre while i tried the first option

    kindly anyone help me in this

    with regards
    selvakumar
     
    selvakumar_in, Oct 27, 2003
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. spectre bsim3v3 model parameters : ps & pd

  2. Model translation from spectreS to spectre

  3. spectre model files

  4. converting Hspice tech file to spectre tech file

  5. Simulating Verilog-A model using spectre.

  6. Simulating Verilog-A model using spectre.

  7. BSIM3v3 model file with statistical model block for Monte Carlo Simulation

Loading...