SLI Cards = Performance?

Discussion in 'SolidWorks' started by Colazi, Nov 23, 2007.

  1. Colazi

    Colazi Guest

    Is anyone using a SLI configuration with SW2007 / 08? Do you notice a
    performance increase? Did you soft quaddro them?

    Trying to decide the better path to upgrade, Quaddro card or 2 SLI enabled
    Gamers cards.

    Thanks,
    Colazi
     
    Colazi, Nov 23, 2007
    #1
  2. Colazi

    iQ Guest

    last time in tested dual video cards (NVidia 4500's) and SLI,
    SolidWorks 2007 did not support it. in fact it slowed down the
    performance by about 5-10%. i have not investigated SWx 2008. iQ
     
    iQ, Nov 26, 2007
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. while simulating with a netlist in tsmc45nm few cards are notsupporting by spectre.How can i solve t

  2. using cheaper video-cards? will nVidia Quadro NVS 280 work OK?

  3. ATI graphic cards

  4. Video cards

  5. ATI FireGL V3100 + (2) SLI Ports

  6. Quadro FX1500 - SLI or no SLI?

  7. SLI config w/ 2 X1.5GB PCIe x16 nVidia Quadro FX5600 cards, Dell

Loading...