sketch lines and area hatch are phantom?

Discussion in 'SolidWorks' started by Joe, Feb 9, 2004.

  1. Joe

    Joe Guest

    In the drawing mode, it seems that all sketch lines, circles,
    polygons, splines, and area hatch are coming in as phantom lines even
    though the properties are solid. Has anyone else experienced this bug?
    I'm running SW 2004 sp2.1.
     
    Joe, Feb 9, 2004
    #1
  2. Joe

    Merry Owen Guest

    Joe,

    I had this problem a while ago & assuming that you have confirmed the line
    settings for your Document Options are OK the fix is:
    Open your drawing/drawing template.
    Select the area Outside the drawing sheet (i.e on the drawing background).
    If you have the line format toolbar active in your command manager, the line
    weight and line type icons will now be active.
    Check the line weight and linetype are set to 'Default'. (I think I upset
    this setting when I manually changed some linetypes one time).
    If this fixes it, make sure you check your template as well!

    HTH

    Merry :)
     
    Merry Owen, Feb 9, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Area and Centroid of Hatch or Boundary with islands

  2. How to solve layout Minimum Density Area across chip / CHIP Area must be >= 14%

  3. Showing Cutaway in Phantom

  4. Phantom property manager

  5. Is this possible, area of a sheetmetal part (square area)

  6. Macro to search all parts in assy for a sketch and convert the entities to a new sketch

  7. The phantom of the solids

  8. Hatch selction point and area

Loading...