Simulating trailering

Discussion in 'AutoCAD' started by Beanboon, Jan 23, 2004.

  1. Beanboon

    Beanboon Guest

    I have a need to create a path for a moving vehicle using autocad. The
    vehicle is attached to a center rail at the nose of the vehicle it had
    two wheels that follow a couple of feet behind (much like you see in
    older dark rides). When it goes around corners, the inside wheels
    track closer to the inside of the corner, but I do not know how to
    draw these dynamics in autocad. Anyone have any ideas?

    Thanks
     
    Beanboon, Jan 23, 2004
    #1
  2. Beanboon

    Tahimik Guest

    Try this website http://www.transoftsolutions.com/

    TRANSOFT SOLUTIONS
    5246 Minoru Boulevard
    Richmond, BC V6X 2A9
    Canada
    604-244-8387
    Milton Carrasco


    Type of Company: Software Supplier

    AUTOTURN
    Software Category: DTM/Civil/Survey

    GUIDSIGN
    Software Category: DTM/Civil/Survey
     
    Tahimik, Jan 24, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. problem simulating with standard cells

  2. Simulating phase noise for PFD-CP

  3. Simulating a circuit which is partly extracted and partly schematic

  4. Simulating in Cadence a D-latch cell DL8 from AMS 0.6 Hit-Kit

  5. Simulating Verilog-A model using spectre.

  6. Simulating Verilog-A model using spectre.

  7. questions on simulating THD' of s/h?

  8. simulating with ahdl code on Cadence IC 5.1.41.usr2

Loading...