Show & Erase icon not in 2001?

I have 2001 build 2001200
and for the life of me I cannot find the icon for "show & erase".

Was this left out of this build?
Do I need to go to another build or is there a file that I can add?

Thanks!

 

: I have 2001 build 2001200
: and for the life of me I cannot find the icon for "show & erase".
:
It should be 'View>Show and Erase', the menu in the menu bar. Right click over the
toolbar area and get a list headed 'Top Toolchest' which list all the toolbars
showing. Make sure that 'Drawing' is checked and if not, check it. You can also go
under 'Tools>Customize screen>Toolbars' and ckeck the Drawing toolbar to display
it. Check the drawing toolbar to make sure it has an icon displayed that looks
like a flashlight. This is the icon for 'Show/Erase'. To save the customizations,
make sure the box is checked for a save to location and browse to your 'Start in'
directory (where you keep your config.pro file). If the 'Show/Erase' icon isn't
displayed, go to the 'Commands' page, find and highlight the 'Drawing' commands,
locate the 'ShowErase' icon and click/drag it to the tool bar. OK your way out of
Customize screen.

David Janes

 

: I have 2001 build 2001200

Hey David,

Thanks so much for the help, I guess I should have elaborated more.
I know where the menu pick is and I know how to customize, but I can't find
the icon, it's like it's not in my build!.

Thanks

Mike

 

: > : I have 2001 build 2001200
: > : and for the life of me I cannot find the icon for "show & erase".
: > :
: > It should be 'View>Show and Erase', the menu in the menu bar. Right click
: over the
: > toolbar area and get a list headed 'Top Toolchest' which list all the
: toolbars
: > showing. Make sure that 'Drawing' is checked and if not, check it. You can
: also go
: > under 'Tools>Customize screen>Toolbars' and ckeck the Drawing toolbar to
: display
: > it. Check the drawing toolbar to make sure it has an icon displayed that
: looks
: > like a flashlight. This is the icon for 'Show/Erase'. To save the
: customizations,
: > make sure the box is checked for a save to location and browse to your
: 'Start in'
: > directory (where you keep your config.pro file). If the 'Show/Erase' icon
: isn't
: > displayed, go to the 'Commands' page, find and highlight the 'Drawing'
: commands,
: > locate the 'ShowErase' icon and click/drag it to the tool bar. OK your way
: out of
: > Customize screen.
:
: Hey David,
:
: Thanks so much for the help, I guess I should have elaborated more.
: I know where the menu pick is and I know how to customize, but I can't find
: the icon, it's like it's not in my build!.
:
So, you go to the Drawing commands on the Commands page of Customize screen and
there are no Drawing icons? or just not the flashlight icon for Show and Erase?

 

Mine is there but only if I have a drawing open. Open a drawing, then
under Tools, Customize Screen, under the Category "Drawing" mine shows
up as the fifth icon from the left on the top line. Hope this helps...

-----Original Message-----
From: Mike Singer [mailto]
Posted At: Thursday, February 05, 2004 8:17 PM
Posted To: comp.cad.pro-engineer
Conversation: Show & Erase icon not in 2001?
Subject: Show & Erase icon not in 2001?


I have 2001 build 2001200
and for the life of me I cannot find the icon for "show & erase".

Was this left out of this build?
Do I need to go to another build or is there a file that I can add?

Thanks!

 

: > : I have 2001 build 2001200

Erase?

Not the one for Show and Erase as my original post stated.