Sheet Metal Broken views and bend lines

Discussion in 'SolidWorks' started by JCelektronix, Jun 10, 2005.

  1. JCelektronix

    JCelektronix Guest

    1. I have a part that when i produce an unfolded drawing and then i
    break it, i get a message that the bend lines will not be shown. Other
    parts in the same assembly once unfolded and broken show their bend
    lines.

    2. On the parts that show the bend lines, the lines are still full
    length. ie they extend past the broken view. Is there a way to change
    this?

    3. Is there a way to reference the bend lines to the view in such a way
    that when the length of the part changes the length of the drawing will
    not.

    I am currently running SW '03 and upgrading to '05 is an option,
    however its not preferred.

    Thanks
    JC
     
    JCelektronix, Jun 10, 2005
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Sheet Metal Bend Radius

  2. Sheet metal, bend back symetrical

  3. Depicting bend lines for a sheet metal part

  4. Sheet Metal - Bend Order (?) Advice / Opinions

  5. Sheet Metal Absurdity Message - This bend is not associated with the model and can be deleted.

  6. Bend instructions on sheet metal drawings, what do you do?

  7. Sheet metal bend lines on drawing but no notes?

  8. Can you reattach broken dimension lines and leader lines?

Loading...