serial spaceball & SW2008

Discussion in 'SolidWorks' started by WormSign, Nov 27, 2007.

  1. WormSign

    WormSign Guest

    Forgive if this has already been asked and answered...I upgraded my SW2007
    to 2008 yesterday and when I run it I get an error message about the
    Spaceball driver not loading. I checked on the 3dconnexion website and I
    have the current driver for the 4000 FLX installed. Are the drivers for
    serial spaceballs not being updated now? If so is there another option to
    hitting my boss up for new spaceballs when the ones we have are working
    great?

    TIA
    Wormsign
     
    WormSign, Nov 27, 2007
    #1
  2. WormSign

    j Guest

    3DConnexion is blaming this on Solidworks changing something in the code
    because of "stability" issues that prevents the 2.8.2 addin from now
    working. What you will need to do is download the latest USB version
    which is 3.5.6. If you already have 2.8.2 installed then when you
    install 3.5.6 ONLY install the Solidworks addin. DO NOT INSTALL the main
    drivers. If you go to the 3Dconnexion forum, it gives you some
    additional information as well.
    http://www.3dconnexion.com/forum/viewtopic.php?t=815
     
    j, Nov 27, 2007
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Get Drive Serial Number

  2. random serial no

  3. Getting the AutoCAD Serial Number from code?

  4. Example of verilog-a serial bit source.

  5. Batchworks requiring my solidworks serial number!!??

  6. Spaceball 4000 serial to usb adaptation

  7. SW2008 and Spaceball 4000

Loading...