Seperation line

Discussion in 'AutoCAD' started by Marcel Janmaat, Jan 28, 2005.

  1. Marcel Janmaat

    Marcel Janmaat Guest

    Can anyone tel me how to create a seperation line like the edge of a
    boxed_row?
    I can't seem to find anything in the DCL manual. But I thought there was
    somting like it.

    M
     
    Marcel Janmaat, Jan 28, 2005
    #1
  2. Marcel Janmaat

    kozmos Guest

    If you only want a line (not a box), you can try adding a Image or image_button with a very tiny height such as 0.1 or 0.08
     
    kozmos, Jan 28, 2005
    #2
  3. Marcel Janmaat

    Marcel Janmaat Guest

    Is this realy the only way? I thougtt there was some kine of line or
    seperator command for it.
     
    Marcel Janmaat, Jan 28, 2005
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. draw line to middle of 2 picked lines then offset that line help...

  2. how to read line by line from a file through a OCEAN script

  3. Insert a Cell on an angled line, and have the line break - automatically?

  4. Insert a Cell on an angled line, and have the line break - automatically?

  5. NEED: Single Line Font... (must be single line inside SW also, nptjust MS Word)

  6. Drawing line on command line.

  7. Text: converting Single-line text to Multi-line

  8. Joining line segments into one single line?

Loading...