Sections and dimensions problem, solved.

Discussion in 'SolidWorks' started by autobus_prime, Feb 16, 2007.

  1. I had a bent part with a cut across the angled portion, and used a
    favorite hack to make a partial auxiliary view - a partial section
    view with a line that doesn't cross the part. Dimensions parallel to
    the section line wouldn't come up with the sketched section line made
    parallel with the part edge, and I couldn't put the section line in
    the sketch plane. Making the section line parallel with the sketch
    plane solved the problem.
     
    autobus_prime, Feb 16, 2007
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.