Section views in drawing file

Discussion in 'Pro/Engineer & Creo Elements/Pro' started by solid3ddesigns, Sep 24, 2004.

  1. solid3ddesigns

    solid3ddesigns Guest

    Can some one provide the steps to create a section view on a drawing
    sheet for using WF2

    Thanks in advance,
    HB
     
    solid3ddesigns, Sep 24, 2004
    #1
  2. solid3ddesigns

    Jeff Howard Guest

    Can some one provide the steps to create a section view on a drawing
    First thing you might want to do is look up "xsec" in help and get familiar
    with model sectioning (View / View Manager / XSec tab; don't ask me why, it
    used to be under Tools / Model Sectioning in WF). Once you've created the
    section in the model, it's pretty easy to figure out how to show it in a
    drawing view, either as a child view or stand alone.

    If you poke around these links you might turn up something useful...

    http://www.ptc.com/go/3d/index.htm
    http://www.ptc.com/community/proewf/newtools/tutorials.htm
    http://www.ptc.com/community/proewf/newtools/primer_reg.htm
     
    Jeff Howard, Sep 24, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Section views

  2. Section Views in SolidWorks 2004

  3. SW2004 SP1 - Can't create section views in drawings!

  4. Bent section views from flat pattern: feature or bug

  5. Is it only me.....or does display only surface not work in shaded section views.

  6. Section lines on half section

  7. Is SW really a drafting program? -Section Views

  8. inserting sketch dimensions from annotation views automaticaly into drawing views

Loading...